To obtain optimum performance from your Footcontroller, please read this guide before its use.
Specifications:Additional Technical Information:
CommunicationMIDI, Midi channel 0 (default)The DXJFC communicates to the DX amplifier via MIDI (Musical Instrument
Digital Interface). Communication is on MIDI channel 0 by default, since the DX
Presets10amplifier operates in omni/poly mode.
Selector SwitchesFive
Presets are changed by standard MIDI program change messages. The MIDI
message value can range from 0 to 9.
DisplayIndicator LEDs for preset display
and tap tempo The Tap function defaults to MIDI controller #80. Value decimal 127 (hex 7F)
Expression PedalPassive volume control type, is sent when the tap is pressed, zero is sent when it is released.
50k 1M ohm impedanceThe expression pedal defaults to controller #11 using single byte controller val-
Power RequirementsSupplied via MIDI cable when used ues. Pedal assignments are communicated to the DX amplifier via a MIDI sys-
tem exclusive (aka sysex) message. The following chart shows the sysex mes-
with Crate DX amplifierssage format (in hexidecimal) after the System Exclusive status byte.
Dimensions 2.25H x 15W x 4D
00, 01, 28 SLME sysex ID code00, kk knob ID (2 bytes) kk = knob ID
Weight2.7 lbs 04SLME packet type00, 01 action ID (2 bytes)
00packet number (zero)ccchecksum cc = calculated checksum
Y Specifications and information subject to change without notice Y06packet data byte countF7end of sysex
00, 01DXJFC product ID
www.crateamps.com
?2000 SLM Electronics, Inc. " A Division of St. Louis Music, Inc.47-063-01
03/00
1400 Ferguson Avenue " St. Louis, MO 63133 |