NEW CONSTRUCTIONOPERATION
If you wish to preinstall a rough-in frame before the drywall Surround Modes
¨
is installed, you will need to purchase the correct rough-in-frameWhen using the system in a Dolby* Digital or DTShome theater
kit for your model:system, make sure all speakers are set to OSmall.�When using
the ERS Series in a Dolby Pro Logic* home theater system,
Speaker ModelRough-In-Frame Kitmake sure the receiverOs center channel mode is set to ONormal.�
ERS 110II, ERS 110DTERS 110RIF or IW6R RIF
Some Dolby Digital-equipped receivers/processors offer different
ERS 210IIERS 210RIF
setup options for each source or surround mode: e.g., CD-stereo,
ERS 310IW8R RIF
videotape, Dolby or Pro Logic. In each case, follow your
ERS HV250IW55 RIF
equipmentOs instructions to ensure that the subwoofer (if you have
Detailed installation instructions are supplied with the
one) output is turned on and that the speakers are set to OSmall�
rough-in kit.
in each mode.
Painting the Speaker Frame and Grille
ERS Series loudspeakers can be painted to match any dŽcor.
If you wish to change their color, the satin finish on the grille
and frame will function as a primer coat. Before painting, install
inner section of template in the assembly kit
securely into the recess in the baffle.This will protect the
speaker components and baffle from paint residue. Use a
high-quality spray paint, and apply a thin coat of color.
Be certain the grille perforations remain free of paint.
Filling them with paint will diminish the sound quality.
Note: Gently remove the acoustical foam blanket from
the grille before painting. Reattach the blanket after the
paint has dried.
6ERS IN-WALL SPEAKERS |