58911Agb.fm5 Page 10 Thursday, February 8, 2001 11:44 AM
BEFORE USING THE GLASS CERAMIC HOB
? To make the most of your new appliances read the
users instructions carefully and keep them on
hand for consultation in the future.
INSTALLATION
Cooktop
The cooktop must be set into a worktop
between 20 mm and 50 mm thick.
The distance between the lower face of the
glass ceramic hob and the cupboard or
separating panel must be at least of 90 mm.
If the cooktop is to be installed next to a
column unit, leave a distance of at least 100
mm from the edge of the cooktop to the side of
the column unit.
Cut an opening in the worktop of the dimensions
shown in the Product Description Sheet supplied
separately.
If not already present, fit the supplied seal to the
cooktop flange after cleaning the contact area as
shown in the figure.
N.B.: Remove the protective film before installing the
cooktop.
If the worktop is made of use wood, the supplied
spring clips and screws.
1. Position the 4 clipD) as s (shown and at the
specified dimensions.
2. Secure the clips using Escrews ().
3. Fit the cooktop into the worktop.
If the worktop is made of marble, plastic,
ceramics, natural stone,, the etc. cooktop must
be secured with brackets (F) code 4819 404 78697
(to be requested from After-Sales Service).
1. Fit the cooktop into the worktop.
2. Position the 4 braFcket) as shs ( own in the figure,
in accordance with the thickness of the worktop.
3. Fix the 4 screws (G ) in holes (H).
10 |