SAFETY INSTRUCTIONS
General safety instructionsFuel safety
IMPORTANT INFORMATION
Y Always use a fuel container
YThe machine is only designed for trimming grass.
with an anti-spill valve.
YThe only accessories to be used with the engine
unit as a drive source are the cutting units we
Y Never fill the machine
recommend in the chapter OTechnical dataO.
while the engine is
YNever use the machine if you are tired, if you
running. Always stop the
have consumed alcohol, or if you are taking
engine and let it cool for a
medicines that can affect your sight, your
few minutes before
judgement or the control of your body.
refuelling.
YUse personal protective equipment. See the
section OPersonal protective equipmentO.
Y Provide good ventilation
YNever use a machine that has been modified so
when filling or mixing fuel
that it no longer corresponds with the originalMin. 3 m
(petrol and 2-stroke oil).
design.(10 ft)
YNever use a machine that is faulty. Follow the
Y Move the machine at least
maintenance, control and service instructions in
3 m from the filling
this Operator�s Manual. Some maintenance and
position before starting.
service actions should be carried out by trained
and qualified specialists. See the chapter
OMaintenanceO.Y Never start the machine:
YAll covers and guards must be fitted before
a)If you have spilt fuel on it.
starting the machine. Check that the spark plug
Wipe up all spillage.
cap and HT lead are not damaged, otherwise you
could get an electric shock.
b)If you have spilt fuel on
YThe machine operator shall ensure, while
yourself or your clothes.
working, that no persons or animals come closer
than 15 metres (50 feet). When several operatorChange your clothes.s
are working in the same area the safety distance
should be at least double tree length, howeverc),If there is a fuel leak. at
least 15 metres (50 feet).Make regular checks for
leakage from the fuel cap
WARNING!and the fuel supply pipes.
Faulty cutting equipment increases the risk
!
of accidents.
StartTransport and storage
WARNING!
Y Store and transport the machine and fuel so that any leakage
When the engine is started with the choke
or fumes do not risk coming into contact with sparks or
!in either the choke or start throttle positions
naked flames. For example, electric machines, electric
the cutting equipment starts to rotate
motors, electrical switches/power switches, heaters or theimmediately.
like.
Y The complete clutch cover with shaft must be fitted before
the machine is started, otherwise the clutch can becomeY When storing and transporting fuel approved containers
loose and cause personal injury.intended for this purpose must be used.
Y Never start the machine indoors. Bear in mind the dangers
Y When storing the machine for long periods the fuel tank
of inhaling the engine�s exhaust fumes.
must be emptied. Contact your local petrol station to find
Y Observe your surroundings and make sure that there is no
out how to dispose of excess fuel.
risk of people or animals coming into contact with the
cutting equipment.
Y Place the machine on the
WARNING!
ground, ensure the cutting
Exercise great care when handling fuel.
!
equipment runs free ofBear in mind the risk of fire, explosions and
twigs and stones. Push theinhaling fumes.
machine body towards the
ground using your left
hand. (NOTE! Not with
your foot). Grip the starter
handle with your right
hand and pull the
startercord.
8 � English |
ACEC
HUSQVARNA
