Before using your dryer, wipe the dryer drum with a damp cloth to
remove dust from storing and shipping.
DRYER USE1. Load clothes loosely into the dryer and close the door. Do not
pack the dryer. Allow space for clothes to tumble freely.
Maximum clothing load (cotton fabrics) is 9.1 kg (20 lb).
Starting Your Dryer
2. Turn the Cycle Control knob to the recommended cycle for
the type of load being dried. Use the Energy Preferred
Automatic Setting () to dry most heavyweight and medium
*
Explosion Hazard
weight loads. See ?Drying, Cycle, and Temperature Tips.?
Keep flammable materials and vapors, such as
gasoline, away from dryer.
Do not dry anything that has ever had anything
flammable on it (even after washing).
Failure to follow these instructions can result in
death, explosion, or fire.
3. Select a temperature setting on models with a Temp/Fabric
selector. The cycle descriptions include temperature setting
suggestions.
NOTE: The temperature selector is part of the Cycle Control
knob on some models.
4. Select the End of Cycle Signal, if available. The signal is
helpful when drying permanent press or synthetics. Promptly
remove these items from the dryer at the end of the cycle to
prevent wrinkles.
5. Select the desired option. See ?Additional Features.?
6. Push the START button. Your gas dryer has an electronic
Fire Hazardignition system for the burner which is fully automatic; no
action is needed by the user (there is no pilot light).
No washer can completely remove oil.
NOTE: Your dryer stops automatically when a cycle ends.
Do not dry anything that has ever had any type of
oil on it (including cooking oils).
Stopping and Restarting
Items containing foam, rubber, or plastic must be You can stop your dryer any time during a cycle.
dried on a clothesline or by using an Air Cycle.
To stop your dryer
Failure to follow these instructions can result in Open the dryer door or turn the Cycle Control knob to OFF.
death or fire.NOTE: The Cycle Control knob should point to an Off area when
the dryer is not in use.
To restart your dryer
1. Close the door.
2. Select a new cycle and temperature (if desired).
3. Push START.
7 |