Effects
Master Effects
3.Move the cursor to the Multi mode Effects Control page using the Data
Entry Control.
FX MULTIMODE CONTROL
use master settings
4.Set the Effect Control channel to use master settings using the Data Entry
Control.
5.Press the Enter key to save the settings and return to the main screen.
Using the Effects Channel Settings in Multi Mode
In Multi mode, the two effects processors can be controlled from the Master
Effects settings or they can follow the effects settings of the preset on a
special MIDI channel. Because up to 16 channels can play at once in multi
mode, the effects cannot be programmed at the preset level. There are only
two effects processors!
vTo Program the Effects by Channel Number in Multi Mode
1.Press the Master menu button. The LED illuminates and the Master
menu screen appears.
2.Use the Data Entry Control to select the MIDI mode page. Choose
Omulti� for the mode.
3.Move the cursor to the Multi mode Effects Control Ţeld using the Data
Entry Control
4.Set the Effect Control to Opreset on Channel #� (where # is replaced by
the actual channel number from 1 through 16) using the Data Entry
Control.
5.Press Enter to save the settings and return to the main screen.
Effect B Into Effect AThe output of effects processor B can be routed into effects processor A.
This connects the effects in series instead of their normal parallel conŢgu-
ration. Two effects connected in series sound very different than the same
two effects in parallel. For example, a chorus patched through reverb can
turn a bland string section into a lush wall of sound. The B �>A amount can
also be controlled for even more �exibility.
vTo Send the Output of Effect B through Effect A:
In this example, 100% of Effect B will be sent into Effect A.
1.Access the FXA parameter screen (in either the Master or Edit menus)
that contains the FXB �>FXA parameter.
154 E-mu Systems, Inc. |
ACEC
OTHERS
