NC
INSTALLATION
Electrical connection
xTheelectricalconnectionsmustcomply
with local regulations.
xThedatarelevanttothevoltageandpower
absorption are indicated on the rating plate.
xTheearthingofthisapplianceis
compulsory by law.
The manufacturer cannot be held
responsible for injury to persons or
animals or damage to property arising
from failure to comply with these
requirements.
xWhenthecookinghobisinstalled,
provide a singleîpole circuit breaker
with a contact breaking distance of at
least 3 mm.
xIfnecessary,theelectricalpowercable
must be replaced exclusively with a
power cable having identical
characteristics to the original supplied
by the manufacturer. This operation
must be performed by Customer Service
or a qualified electrician.
ab
Connection to gas supply
The gas supply system must comply with
local regulations.
The connection of the cooking hob to the gas
pipe network or gas cylinder must be made by
means of a rigid copper or steel pipe with
fittings complying with local regulations, or by
means of a continuousîsurface stainless steel
hose complying with local regulations. Interpose
gasketb in the elbow connection.
Themaximum length of thehoseis2m.
Important: if a stainless steel hose is used,
it must be installed so as not to touch any
movable part of the furniture. It must pass
through an area where there are no
obstructions and where it is possible to
inspect it on all its length.
8
MY
8 |