Self-CleaningInterrupt Self-Clean Cycle
1. Turn oven temperature knob to OFF position.
2. When oven has cooled to a safe temperature,
LOCKED light flashes. Door can be unlocked and
!WARNINGopened.
To avoid risk of personal injury, do not touch oven
vents or areas around vents during self-cleaning.? Do not force door lever open. If door lever is forced,
These areas can become hot enough to cause burns.lock can be damaged.
After Self-cleaning Cycle
To avoid risk of smoke damage or fire, clean excessTurn oven temperature knob to OFF position when
spills from oven interior.finished. After oven has cooled LOCKED light flashes.
Door can be unlocked and opened.
Prepare for Self-clean Cycle
? A small amount of smoke is normal when cleaning.
Excess smoke may indicate a faulty gasket or too
much food residue has been left in oven. Move birds and
small animals susceptible to fumes or smoke to
another room.
? Oven should be cleaned before it gets too dirty. Wipe up
large spills before self-cleaning.
? Do not use cleaning cycle if oven light cover is not
properly in place.
Self-cleaning
1. Prepare oven for self-cleaning.
? Remove oven racks and all cooking utensils from
oven.
? Clean excess spills from oven interior.
? Remove items from rangetop and backguard. These
areas can become hot during self-cleaning cycle.
2. With oven door closed, move oven door lever located
above oven door to right to lock oven door.
? If oven is too hot before starting self-clean cycle,
oven lever will not move to locked position. Allow
oven to cool before starting cycle.
Unlock Lock
Oven Door Lever
3. Turn oven temperature knob to CLEAN position.
? If oven temperature knob is set before oven door
lever is moved, LOCKED light flashes. Move oven
door lever to locked position.
?LOCKED and OVEN indicator lights glow.
? Self-clean cycle lasts for approximately 4 hours.
After self-clean cycle, OVEN and LOCKED lights
flash. Turn temperature knob to OFF position and
move oven door lever to unlocked position.
22 |
ACEC
WHIRLPOOL
