BASIC OPERATION: DJ PLAYER OPERATION
3. If auto cueing is off, playback will begin automatically÷ When you stop turning the Jog dial, the unit returns to playback mode.
from the first track.÷ Release the SEARCH button to exit this mode.
? When auto cueing is off, playback will continue after the first track has
been played, with all subsequent tracks being played in sequence.LOOP IN/REALTIME CUEVINYL
? When playback of the final track is complete, playback will automaticallySPEED
ADJUST
come to an end.TOUCH
/BRAKE
Stopping PlaybackVINYL
SPEED
ADJUST
Press the EJECT button (0) when the EJECT UNLOCK/LOCK switchRELEASE
is set to UNLOCK./START
JOG
When the EJECT UNLOCK/LOCK switch is set to LOCK, press the PLAY/
MODE
PAUSE button (6) during playback, or when a Cue point has beenSELECT
set, press the CUE button (back cue) before pressing the EJECT button TEMPO TRACK
?6/?10/?16/?24
(0) to eject the disc.MASTERSEARCH
4, c
? Playback will stop and the disc will be ejected. TEMPO
SEARCHTEMPO
? Note that the CDJ-1000 does not come with a stop button.1, ! RESET
To Pause PlayCUE
During playback, press the PLAY/PAUSE button (6).PLAY/PAUSE
6
÷ The PLAY/PAUSE buttonOs indicator and [CUE] indicator will flash, and play
will be paused.Jog dialMASTER TEMPO control knob
÷ When the PLAY/PAUSE button is pressed again, play will resume and the but-
ton indicator will light steadily.Cue Point Settings (*)
÷ In the CDJ mode broken sound will still be audible during the standby mode; ifOnce a Cue point has been stored in memory, during playback it can be used to
you wish to stop all sound, lower the output sound volume on your audio mixer.place the player in a state where it is ready to begin playback from the cueing
÷ When the unit has not been operated for 80 minutes or more in pause mode,
position by pressing the CUE button.
the disc rotation stops automatically. In this instance, playback can be resumed
7 Setting the Cue point in the CDJ mode
by pressing the PLAY/PAUSE button.
1. During playback, press the PLAY/PAUSE button (3/8) to
Track Cueingpause playback at the point you wish to begin playback.
2. Search for the precise position of the Cue point.
7 TRACK SEARCH buttons (4, c)
? Using frame numbers to specify Cue points.
Press one of the TRACK SEARCH buttons (4, c).
÷ Each time the button is pressed, the track is cued in the direction corre-Cue points may be specified in 1-frame units (where 75 frames are equiva-
sponding to the arrow on the button (during playback of one track, to cuelent to 1 second).
Use the Jog dial or the forward or reverse SEARCH button (1, !) to
playback to the beginning of the preceding track, press the 4 button
advance to the desired frame. Rotating the Jog dial once causes the player
twice).
to advance or rewind 135 frames in the specified direction.
÷ When the button is pressed down and held, cueing is continuous. If the
button is held for two seconds or more, the cue speed increases.? Listen to the sound at the current frame to determine the Cue
÷ When the beginning of the first track (track 1) is reached, pressing thepoint.
Turn the Jog dial slowly and then return it to just before the point from
4 button will cue to the last track.
which you wish to begin playback. (The cue point thus defined will consist
÷ When the end of the disc's last track is reached, pressing the c button
of that point diectly after the sound which can be heard during a cueing
will cue to the first track (track 1).
pause.
7 Super-Fast Track Search
3. Press the CUE button when you reach the desired frame
Rotate the Jog dial while pressing one of the TRACK SEARCH
number or hear the sound at the point from which you
buttons (4, c).
wish to begin cueing.
÷ While holding either one of the buttons depressed, rotate the dial in the? When the sound is muted and the [CUE] indicator lights up, the Cue point
direction corresponding to the direction you wish to skip; the unit will en-
will have been stored to memory.
ter the high-speed skip mode.
? Each time a new Cue point is stored to memory, the previous Cue point will
÷ The direction of skip is in accordance with the direction in which the Jog
be erased.
dial is rotated. (the TRACK SEARCH button direction is released.)
[Amending the Cue point]
÷ The high-speed skip mode is canceled when the TRACK SEARCH button
1. During playback, press the CUE button.
is released.
? This will take you back to the set track position.
Fast-Forward / Fast-Reverse2. In the CDJ mode, to set the Cue point, go through steps 2
7 Operation using the SEARCH buttons (1, !)and 3 as mentioned above.
Press the SEARCH buttons (1, !) during playback.7 Setting the Cue point in the VINYL mode
Press and hold the ! button to fast forward the disc; press and hold the 11. During playback, at the point where you want to set the
button to do fast reverse.
track, press the surface of the Jog dial and cause a
7 Super-Fast Searchtemporary stop.
Rotate the Jog dial while pressing one of the SEARCH buttons2. While pressing the surface of the Jog dial, turn back the
(1, !)dial to a point just before the track you wish to play.
÷ Hold down the button while turning the Jog dial in the direction you wish
3. When the sound is the track you are searching for, press
to search to enter fast forward or fast reverse mode.
the CUE button while you are still pressing the surface of
÷ The direction of the search is determined by the direction the Jog dial is
the Jog dial.
turned. The direction of the SEARCH button is ignored.? When the [CUE] indicator lights up the point will be stored in memory.
? When a new Cue point is stored in memory the previous setting will be
12erased.
<DRB1297>
En |
ACEC
PIONEER
