ENGLISH
(2) Starting playback from the Middle of a track (Manual Search)6PITCH/BRAKE
Y When the track is selected with the TRACK SELECT knob o and the PLAY/PAUSE button !1 is pushed,
Y There are two ways to change the playing speed.
playback starts from the beginning of that track. If you wish to start from a different position, use theY Adjust the Pitch using the pitch slider !3.
procedure described below to search for the desired position.Y The PITCH BEND button !2 or jog wheel y can be used to temporarily change the pitch.
Y The playing speed can be changed greatly to achieve effect similar to those achievable with analog vinyl.
Find the play start position.Shockproof memoryY If you wish to preserve the original key of sound, set the Key Adjust function to ON.
Turn the shuttle ring !7 to change theYA maximum of approximately 20 seconds
playback position quickly. (Search for theuncompressed audio data is stored into memory(1) Pitch
approximate playback position.)(per drive). This guards audible interruptions due
to external mechanical shocks such as bumps[Pitch slider][PITCH BEND button]
The fast forward/reverse mode
SEARCHI§SCANor other hard vibrations.Set the variable speed mode.Push the PITCH BEND + (or
II6 7is set when the shuttle ring
Y If advanced data reading is not possible due toPush the PITCH button !4 to lightPITCH BEND �) button !2.
(outer side) !7 is turned.
scratches or dirt on the disc, playback stops1-1the PITCH LED.Y The Pitch increases or
The speed changes according to
once the data stored up to that point is read.decreases temporarily while the
the angle at which the ring isY PITCH ? KEY (key adjust) ? OFF
RVSFWD
1(Green) (Orange)(Off) (LED color)PITCH BEND + or PITCH BENDturned.
2-1
� button !2 is pushed.
Y When operated during playback, playback
PitchY The extent to which the PITCH BEND button
resumes after the operation.The Pitch decreases
decreases!2 changes the Pitch is proportionate to the
YWhen playback is started, the jog wheel iswhen the pitch slider !3
amount of time the button is pushed. The
set to the bend mode.is moved upwards,
1-20%longer the button is held down, the greater
Y When turned fully in either direction, theincreases when the pitch
the percentage of change.
playback position jumps about 10 seconds.slider !3 is moved
Pitch
The jump time can be selected in the presetdownwards.Set the jog wheel to the pitch bend mode.
increases
mode from 10, 20, 30 or 60 sec.
During playback, pitch bend is setting for the
DN-D4500 has six pitch ranges,Jog wheel.
Turn the jog wheel y. (Search for the precise4%, 10%, *16%, 24%, 50% andY The playing speed increases
SEARCHI§SCAN
playback position.)100%. (*Max MP3) When thegradually when the jog wheelII6 7
RANGE button !4 is pushedy is turned clockwise and
SEARCHWhen the jog wheel (inner side)
III6 7for more than 1 sec, the pitch2-2SCANdecreases gradually when the jog§
y is turned, the frame move
range can be selected by turningmode is set.wheel y is turned
1-3
the TRACK SELECT knob o.counterclockwise. When you stop turning
The playback position can be
the jog wheel y, the playing speed returns
RVSFWDmoved in units of one frame.Y When the TRACK SELECT
2
knob o is pushed down theto the previous speed.
Listen to the sound and find the desired playpitch range is entered andY When playback is stopped, the jog/shuttle
start position.wheel is set to the search mode.
the pitch range selection
mode is completed.
NOTE:
Y For MP3 discs, frames are not displayed,
however frame resolution is audible by turning(2) BRAKE
the jog wheel (inner side) y.
Y Use this function to achieve effect similar to analog players.
Push the BRAKE button i to light
the BRAKE LED.
Y The effect sound is similar to
a DJ turntable coming to a
1quick stop. This effect can
be achieved by pushing the
PLAY/PAUSE button !1
during playback.
11 |
ACEC
DENON
