Using the Remote Controller with Other ComponentsNContinued
Using Macros5On the remote controller, press the
buttons whose actions you want to
With the Macro function you can program the remote program into the macro in the
controller to perform a sequence of actions with one
press of a button. For example, normally you need to order you want them performed.
To program the CD example in the left
perform the following actions to use a CD player thatOs column into a macro: press the scroll
connected to the DTR-10.5:
1. Press the scroll wheel, (to select AMP mode).wheel, press the [On] button, roll the
2. Press the [On] button (to turn on the DTR-10.5).scroll wheel to select CD, press the
scroll wheel, and then press the Play
3. Roll the scroll wheel to select CD (to select the
CD remote controller mode and the CD input [] button.
source).Actions are numbered from 1 to 8.
4. Press the Play [] button (to start the CD Macro #1 selected
player).
With the Macro function you can program the remote 8 actions learned
controller to do all of this with one press of a button.
Making Macros
After each button is pressed, OSET� fol-
You can make up to eight macros, and each macro can lowed by OKEY� is displayed.
perform up to eight actions.To add an action that selects an input
source for the main room, Zone 2, or
1Press and hold the [Custom] but-Zone 3, press the [Input], [Zone 2], or
ton for more than three seconds.Custom[Zone 3] button, respectively, roll the
The remote controller enters Custom scroll wheel to select the input source,
mode.and then press the scroll wheel.
When youOve Ţnished, press the
Roll the scroll wheel to select 6
2OMACRO,� and then press the Macro button.
After the following appears on the dis-Macro
scroll wheel.play, the display returns to normal.
Using the Remote Controller
Roll the scroll wheel to select
3
OEDIT,� and then press the scroll
wheel.
4Roll the scroll wheel to select a
macro, and then press the scroll
wheel.
Macros are numbered from 1 to 8.
Macro #1 selected
Action #1
137 |
ACEC
INTEGRA
