CARE AND MAINTENANCE
Before cleaning or carrying out maintenance,
switch off the appliance, disconnect the mains
plug and turn off the water tap.
Cleaning the outside of the appliance:
To clean the outside of the appliance, use a
neutral detergent and a damp cloth. To clean
the control panel, use only a slightly damp
cloth.
Do not use abrasive detergents.
Cleaning the inside of the dishwasher:
Regularly wipe the door seal and inside of
the door with a damp cloth to remove any
food residue.
Upper spray arm (A):
1. To remove the upper spray arm, extract the
basket and unscrew the upper spray arm by
turning it to the right. Extract the spray arm by
pulling it downwards.
2. Rinse the nozzles under running water;
remove any obstruction in the holes.
3. Remount the spray arm by aligning it with the
rotary mounting and rotate it completely to the
left as far as it goes (click should be heard).
Make sure the spray arm rotates freely.
Lower spray arm (B):
1. Remove the lower basket and then lift off the
arm.
2. Rinse the nozzles.
3. Remount the spray arm by aligning it with the
rotor pin and insert it.
4. Push the spray arm down until it is fixed in
place (click should be heard).
5. Make sure the two levers are correctly
inserted (they should click).
Make sure the spray arm rotates freely.
Cleaning the filters (C):
The filters (coarse, fine and main plastic or metal
filter) are utilized to prevent large food remains or
other objects from clogging the pump.
Filters should be cleaned periodically to remove
the collected food remains and others.
1. Turn the wide-mesh and fine-mesh filter unit
anti-clockwise and remove it from the main filter.
2. Remove the main filter too.
3. Remove the fine-mesh filter from the
wide-mesh filter (see figure) and wash them.
Clean the main filter with a soft brush.
4. Reassemble: replace the main filter.
Replace the fine-mesh filter into the wide-
mesh one and fix the filter unit down inDo notto the operate the dishwasher without
main filter by turning it completely to thfilters and checke right. that the filter unit is
5. Make sure the filters have been inserted correctly assemband led to ensure good
secured correctly.wash results.
17 |
ACEC
WHIRLPOOL
