CHAPTER 8 FIXING SYSTEM
6. Removing the Fixing Lower Roller
1) Open the front cover.
[2][1]
2) Remove the fixing cover.
3) Slide out the transfer drum frame.
4) Remove the fixing assembly unit.
5) Remove the screw [1], and slide the fixing
inlet guide [2] to the rear to detach.
Figure 8-411
[4] [3]
6) Remove the fixing lower heater.
7) Open the fixing upper roller unit.
8) Remove the screw [3], and shift the heater
faston base [4].
Figure 8-412
9) Pull out the fixing lower roller as shown.
When mounting the fix-
ing lower roller, take care
so that it will not be dam-
aged by the thermistor.
10) Remove the metal fixing from the fixing
lower roller; then, detach the gear,
bearing, heat-insulating bush, and collar.
Figure 8-413
COPYRIGHT ? 2002 CANON INC. CANON CLC1100/1130/1150/1160/1180 REV.2 FEB. 2002 PRINTED IN JAPAN (IMPRIME AU JAPON)8-17 |
ACEC
