PLAYBACK Using The Cassette Adapter
EN37
Cassette Adapter
Use this to play back a VHS-C video cassette recorded
with this camcorder on a VHS VCR. It is fully compatible
with any VHS video cassette recorder. The C-P7U adapter
is battery powered and automatically performs tape
loading and unloading.
INSERT BATTERY
1Slide the battery cover up to remove it, and install
one OR6(AA)� size battery as shown in the
illustration on left, then reattach the cover.
VCR
INSERT CASSETTE IN ADAPTER
2Slide the latch to open the adapter compartment
door, then insert the cassette and close the
Compartment doorcompartment door.
PLAY BACK ON CONNECTED VCR
3Load the cassette adapter into the VCR and play the
tape back as you would any other.
REMOVE CASSETTE FROM ADAPTER
4Slide the latch and the compartment door opens
automatically. This may take around 10 seconds. Do
not attempt to force the adapter open. Then, insert
your finger in the hole on the underside of the
adapter as shown in the illustration at left, and push
up and remove the cassette.PLAYBACK
Sliding latch
NOTES:
Compact video cassette
cDuring tape loading and unloading, do not touch the
reels for safety and tape protection.
cDuring special-effect playback (slow motion, still frame,
etc.), the picture may vibrate or noise bars may appear
Reels
on the screen.
cTo record on a VCR using a compact cassette and the
adapter, cover the adapterOs recording safety hole with
adhesive tape.
Recording safety hole |
ACEC
