Preparation
English
General Notes
TV
? Depending on your TV and other equipment you wish to
connect, there are various ways you could connect the
player. Use only one of the connections described below.
? Please refer to the manuals of your TV, VCR, Stereo System
or other devices as necessary to make the best
connections.
? For better sound reproduction, connect the playerOs audio
out jacks to the audio in jacks of your amplifier, receiver,
stereo or audio/video equipment. See �Connecting toZ
AXY
optional equipmentO.
Caution:
� Make sure the DVD player is connected directly
to the TV. Set the TV to the correct video input
PCM-MPEG2-Dolby Digital-DTSDIGITAL AUDIO OUT
channel.
RL(CVBS)PR/CRPB/CBYS-VIDEO
� Do not connect the playerOs audio out jack toCOAXIALAUDIO OUTVIDEO OUT
the phono in jack of your audio system.
� Do not connect your DVD player to the TV via
your VCR. The DVD image could be distorted by
the copy protection system.
Connecting to Optional
Equipment
Connecting to a TV
Connecting to an amplifier equipped with
? Make one of the following connections, depending on the
capabilities of your existing equipment.two channel analog stereo or Dolby
Surround
Component Video (PR/CR PB/CB Y)
1Connect the Left and Right audio out jacks of the DVD
connection
player to the audio left and right in jacks on your amplifier,
receiver or stereo system, using the supplied audio cable
1Connect the PR/CR PB/CB Y video out jacks on the DVD
(A).
player to the corresponding in jacks on the TV using an
optional PR/CR PB/CB Y cable (Z).
Connecting to an amplifier equipped with
2Connect the Left and Right audio out jacks of the DVD
two channel digital stereo (PCM) or to an
player to the audio left/right in jacks on the TV (A).
Audio/Video receiver equipped with a
S-Video (Y/C) connectionmulti-channel decoder (Dolby Digitala,
MPEG 2 or DTS)
1Connect the S-Video video out jack on the DVD player to
the S-Video in jack on the TV using an optional S-Video1Connect the playerOs coaxial digital audio out jack to the
cable (Y).corresponding coaxial digital audio in on your amplifier. Use
2Connect the Left and Right audio out jacks of the DVDan optional digital audio cable (F).
player to the audio left/right in jacks on the TV (A).2You will need to activate the playerOs digital output (see
�Personal PreferencesO).
CVBS connection
Digital Multi-channel sound
The digital multi-channel connection provides the best
1Connect the CVBS video out jack on the DVD player to
sound quality. For this you need a multi-channel Audio/
the video in jack on the TV using the video cable supplied
Video receiver that supports one or more of the audio
(X).
formats supported by your DVD player (MPEG 2, Dolby
2Connect the Left and Right audio out jacks to the audio
Digitala or DTS). Check the receiver manual and the logos
left/right in jacks on the TV (A).
on the front of the receiver.
8PREPARATION |
ACEC
