63733128GB.fm Page 8 Tuesday, February 15, 2005 3:09 PM
Guide to the refrigerator/freezer and ice/water dispenser control panel
Vacation
This function turns off the refrigerator compartment if you
are going away for some time. To activate the function press
button (yellow LED lights up).
T° disappears from the display and a green dot appears.
To turn on the refrigerator compartment, press button
again.
Important:
After activating this function remove perishable food from
the refrigerator compartment and keep the door closed.
Freezer/Refrigerator Door Open Indicator Light
The refrigerator or freezer door symbol lights up (green
LED) when one or both of the doors are opened.
Alarms
In the event of an alarm, the acoustic alarm and indicator
lights are activated.
To switch off the acoustic alarm press button .
Freezer T° alarm
The acoustic alarm will sound and the red LED will blink, T°
disappears from the display and two hyphens appear.
The alarm is activated when:
? The appliance is connected to the power supply for the first
time or after prolonged disuse.
? The freezer compartment T° is too high.
? The quantity of foods loaded into the freezer exceeds that
indicated on the data plate.
? The freezer door has been left open for a long time.
Power failure alarm
The maximum T° reached during a power failure blinks on
the freezer display.
The red alarm LED lights up and the acoustic alarm sounds at
the same time.
The alarm is activated when:
? A prolonged power failure takes place, causing the internal
temperature of the freezer to increase to values that cannot
guarantee safe storage of food.
To disable the alarm:
? Press the reset button .
? The display will show the preset temperature.
Note
Check the state of the food in both compartments before
refreezing or using it!
Operation alarms
If the acoustic alarm sounds and the display shows letters,
contact the Whirlpool After-sales Service.
8 |
ACEC
