Starting Your Washer
2. (OPTIONAL) Pour measured liquid chlorine bleach into the
liquid chlorine bleach dispenser (on some models). Bleach
WARNING
will be diluted automatically during the wash part of the cycle.
Fire Hazard
Never place items in the washer that are dampened
with petrol or other flammable fluids. Do not use more than 250 ml (1 cup) for a full load. Use
less with a smaller load size.No washer can completely remove oil.
 Follow the manufacturer?s directions for proper use.
Do not dry anything that has ever had any type of oil on
 To avoid spilling, use a cup with a pouring spout. Do not
let bleach splash, drip, or run down into the washer it (including cooking oils).
basket.
Doing so can result in death, explosion, or fire.
 Use only liquid chlorine bleach in this dispenser.
NOTE: On models without a bleach dispenser, see ?Adding
bleach to models without a bleach dispenser.?
WARNING
3. (OPTIONAL) Pour measured liquid fabric softener into the
liquid fabric softener dispenser (on some models). Softener is
added automatically during the rinse portion of the cycle.
Electric Shock Hazard
Electrically earth this appliance.
Do not use an extension cord or an electrical portable
outlet device.
Dilute liquid fabric softener by filling the dispenser with warm
Failure to follow these instructions can result in death, water until liquid reaches the crossbar in the opening.
fire or electric shock.
 Do not spill or drip any fabric softener on the clothes.
 Use only liquid fabric softener in this dispenser.
1. Measure detergent and pour it into the washer. If desired, add
powdered or liquid color safe bleach. Add extra detergent for NOTE: On models without a fabric softener dispenser, see
?Adding softener to models without a fabric softener
the Super Wash cycle. dispenser.?
4. Close the washer lid. Washer will not agitate or spin with the
lid open.
5. Turn the LOAD SIZE selector to the correct setting for your
wash load and the type of fabric being washed.
Drop a sorted load of clothes loosely into your washer.
 Load evenly to maintain washer balance. Mix large and small
items.
 Items should move easily through the wash water.
Overloading can cause poor cleaning. Choose a load size that allows the load to move freely for
best fabric care. See ?Loading.?
 To reduce wrinkling of permanent press clothes and some
 You may change the load size selection after the washer
synthetic knits, select a ?Large? LOAD SIZE setting to provide has started filling by turning the selector to a different
more space for the clothes (see Step 5).setting.
6 |
ACEC
