Dryers
ELECTRICAL CONNECTION
The heater on the electric model is larger than a standard European
model, and the total power required to operate the dryer is more than a
normal 13 amp socket can provide. It is therefore necessary to connect
the power cable directly into a suitable electrical supply that is rated at 30
amps or above, i.e. a spare cooker box.
VENTING
The dryer should be vented to avoid excessive build up of condensation
in the room. The venting outlet on the dryer is a standard 100mm (4
inch) and does not require any special adapters to connect it to the dryer.
Use metal ducting or a exible metal hose. A standard length metal
hose is provided with most models, longer lengths or kits with an elbow
are available from Whirlpool Service, telephone: 0870 600 8989, or from
most DIY stores or builders merchants.
If in doubt about any of the installation requirements, please contact our
technical advice department at 020 8649 5228. |
ACEC
