CHECKING YOUR VENT
4.Use the straightest path possible when routing6.Clean exhaust vent periodically, depending on use,
the exhaust vent. Usebut at least every 2
the fewest number ofyears, or when installing
elbows and turns. Allowyour dryer in a new
room when usinglocation.
elbows or making turns.YDisconnect vent from
Bend vent gradually tothe dryer and clean one
avoid kinking.section at a time until
you reach the exhaust
hood.
Use the hose attach-
Y
ment on your vacuum,
or a pole or wire with a feather duster or rag
5.Use duct tape to seal all joints. Do notuse
attached, to clean out lint.
screws to secure vent.
Lint may catch onYBe sure the flapper on the outside end of vent
moves freely.
screws.
YWhen cleaning is complete, be sure to follow the
Installation Instructions supplied with your dryer
for final product check.
7 |
ACEC
