NORMAL WASH Cycle
A double wash for normal to heav-
ily soiled loads. (The Energy Guide
Label data is based on this Cycle.)
Cycle time is about 6.3 minutes.
LIGHT WASH Cycle
For normal, everyday soiled loads.
Cycle time is about 58 minutes.
RINSE & HOLD Cycle
For rinsing a few items to be
washed one or more days later.
Cycle time is about12 minutes.
Use AIR DRY only.
HEAT DRY or AIR DRY?
save energy, but dishes take longer to dry (over-
If the HEAT DRY Optton is selected, air in the night) and some water spotting may result.
dishwasher is heated during the ?dry? part of Some items (such as plastics) may need towel
the cycle. drying.
If the AIR DRY Optton is selected, air in the For best resultsuse a liquid rinse aid such as
dishwasher is not heated. Using this option helps Jet-Dry?
Changing a setting 2. Turn the Cycle Control Knob clockwise to the
You can change a setting anytime during cycle you want.
any cycle. 3. Be sure the detergent dispensers are filled
1. Lift up on the door latch to unlatch the door properly for the new cycle.
and stop the cycle. Don?t open the door until 4. Press door firmly to latch it. The dishwasher
the spray arms stop spinning. will automatically start the new cycle.
To add a dish after starting
1. To be sure the added item is washed and 4. Close the door. Do not latch it. Wait 30 sec-
rinsed, make sure the Cycle Control Knob onds for air in the dishwasherto warm up. This
has not passed LIGHT WASH. helps reduce the amount of moisture that
2. Lift up on the door latch to unlatch door to can come from the vent when restarting the
stop the cycle. Don?t open the door until the cycle.
spray arms stop spinning. 5. Press door firmly to latch it. The dishwasher
3. Open the door and add the dish. will automatically start where it stopped. |
ACEC
