DescriptionError No.Error Description
Check the interface between the remote control and 100500Remote Control test succeeded.
the DCB by checking the key-code displayed. At least 100501DCB could not be accessed by the analogue board.
one key must be tested. The test can be exited by
100502There was no response from the analogue board.
pressing the STOP-,REC-, or PLAY-key on the local
100503The error code returned from the analogue board is unknown.
keyboard. The user should press PLAY to indicate a
successful test. The REC-key is pressed if the test 100504DCB Remote control; no user input received.
failed, and STOP can be pressed to abort the test. The 100505DCB Remote control; test failed.
keyboard can also be used for the same purpose .The 100506DCB Remote control; test aborted.
O or o key stops the test and the N or n key indicates
100507Failed to clear FP buffer.
an error. The rest of the keys of the keyboard are used
to abort this test at any time.100508Test stopped from service port.
Switch the record LED on, and after confirmation off. 100600Switching Led on succeeded.
The user confirms by pressing the REC key, STOP key, 100601DCB could not be accessed by the analogue board.
or the PLAY key on the local keyboard. The PLAY key
100602There was no response from the analogue board.
confirms that the LED is on and the REC key indicates
100603The DCB did not light all the leds.
an error. The STOP key signals the abortion of the test
by the user. The keyboard can also be used for the 100604The user skipped the rest of the test.
same purpose . The O or o key confirms that the test 100605The user returned an unknown confirmation:
pattern is OK and the N or n key indicates an error or
that the user wants to go to the next test. The rest of
100606The error code returned from the analogue board is unknown.
the keys of the keyboard are used to exit this nucleus at
any time. After that the nucleus switches the LED off.
110000Communicating with the analogue board succeeded.
110001The test returned the wrong string.
Check the communication between the digital board
110002Communicating with the analogue board failed.
and the analogue board by issuing some echo string.
110103The analogue board returned an unexpected result.
110104Receiving character failed.
110100Communicating with the NVRAM on the analogue board succeeded.
110101The analogue board could not communicate with the NVRAM.
Check the communication between the digital board
110102Communicating with the analogue board failed.
and the NVRAM on the analogue board.
110103The analogue board returned an unexpected result.
110104The write-read test failed.
110200Communicating with the tuner on the analogue board succeeded.
Check the communication between the digital board 110201The analogue board could not communicate with the tuner.
and the tuner on the analogue board.110202Communicating with the analogue board failed.
110203The analogue board returned an unexpected result.
Communicating with the data slicer on the analogue board
110300
succeeded.
Check the communication between the digital board
110301The analogue board could not communicate with the data slicer.
and the data slicer on the analogue board.
110302Communicating with the analogue board failed.
110303The analogue board returned an unexpected result.
Communicating with the sound procesor on the analogue board
110400
succeeded.
Check the communication between the digital board The analogue board could not communicate with the sound
110401
and the sound processor on the analogue board.processor.
110402Communicating with the analogue board failed.
110403The analogue board returned an unexpected result.
Communicating with the A/V selector on the analogue board
110500
succeeded.
Check the communication between the digital board
110501The analogue board could not communicate with the A/V selector.
and the A/V-selector on the analogue board.
110502Communicating with the analogue board failed.
110503The analogue board returned an unexpected result.
110600Reading the hardware version succeeded.
110601The segment containing the hardware version could not be found.
Get the hardware version of the analogue board.
110602Communicating with the analogue board failed.
110603The analogue board returned an unexpected result.
110700Reading the boot-software version succeeded.
Get the software version of the boot software of the 110701The segment containing the boot-software version could not be found.
analogue board.110702Communicating with the analogue board failed.
110703The analogue board returned an unexpected result.
1-4-8E9480FIS |
ACEC
