CONNECTIONS
Refer to the separate installation instructions Electrical connections:
booklet. Closely adhere to local Electricity Board
Water inlet and drain:regulations.
Strictly follow local Water Board regula Voltations.ge information is shown on the rating
Make sure the inlet and drain hoses are plate mounkink-ted inside the door on the right
free and are not crushed.hand side.
If the hose length does not suffice, replac The ape pliance must be earthed as prescribed
with similar hoses obtained from your locaby law.l
dealer or our After-Sales Service. Do not use extension leads or multiple
The inlet hose must be securely clamped toadapters et c.
the water tap to prevent leaks. Before carrying out maintenance, disconnect
The inlet water temperature varies according the mains plug.
to the model installed: inlet hose marked Do not use the dishwasher if it has been
?25° C?.damaged in transit. Consult your local retailer
All other models: maximum temperatu°C. re 60or our After-Sales Service.
When installing the appliance, make sure The pothe wer cable must only be replaced by a
drain water discharges correctly and, if qualified technician.
necessary, remove the wire gauze from the
sink siphon.
Secure the drain hose with a clamp to the
siphon to prevent it from dropping off during
operation.
For appliances with water-stop system only:
if the water connections are made correctly,
the water-stop system safeguards your home
against damage caused by flooding.
84 |
ACEC
