3. When the oven is first installed
Once the oven has been installed:
a) set the thermostat knob to MAX;
b) switch the oven function control knob to
conventional cooking ( );
c) allow the oven to run empty for approximately
45 minutes;
d) open a window for ventilation.
During this time, an unpleasant odour may be emitted.
This is absolutely normal, and is caused by residues of
manufacturing.
Once this operation is carried out, let the oven cool
down, then clean the oven cavity with a soft cloth soakedFO 0799
Fig. 5
in warm soapy water.
Before cooking for the first time, carefully wash the
shelf and the dripping pan.
Per aprire la porta forno impugnare sempre
To open the oven door, always catch the handle
la maniglia nella sua parte centrale
in its central part (Fig. 5 and 6).
(Fig. 13 e 14)
Fig. 6
4. Using the Oven
If you need to cook more than one dish in the fan oven
Conventional cooking
at the same time, place the shelves on the first and third
Turn the oven function control knob to the relevant
position from the bottom (See Fig. 7).
symbol ( ) and set the thermostat knob on the
If you are cooking only one dish in the fan oven, use the
required temperature.
lower positions, as this will give you better results.
This function uses the top and bottom elements to give
single level cooking. If you need more heat from the
bottom or from the top, you can adjust the shelf on the
Defrosting
lower or higher positions. (See Fig. 7)
Turn the oven function control knob to the relevant
symbol ( ) and set the thermostat knob on the OFF
The Fan Oven ( )
position (symbol : l ).
Turn the oven function control knob to the relevantThe oven fan operates without heat and circulates the
air, at room temperature, inside the oven. This increases
symbol ( ) and set the thermostat knob on the
the rate at which defrosting takes place.
required temperature.
The fan situated behind the back panel circulates heated
air into the oven.
7 |