BM 1609929C59 12/02 12/10/02 9:44 AM Page 8
Assembly
To prevent serious personal3. Install outer flange with flat side out.
!WARNING
injury, always disconnect the4. Thread arbor nut provided onto spindle
plug from power source before changingfinger tight, depress spindle lock and tighten
wheels, or making any adjustments.wheel with the wrench provided.
INSTALLING ABRASIVE WHEELSDo not overtighten. Cracks
!WARNING
Always use the arbor nut that has samein the wheel can occur if
thread size as spindle.overtightened.
1. Install inner flange onto spindle, withDo not depress spindle lock
recess in back side of flange engagingwhile the tool is running.!CAUTION
matching area on spindle.
2. Install abrasive wheel onto spindle.
Operating Instructions
Always use wheel guard,
!WARNING
foot plate and auxiliary
handle with this abrasive cut off machine.
PADDLE SWITCH
WITH "LOCK-OFF" FEATURE10
The Paddle Switch enables the operator to
control switch functions of "Lock-OFF", and
"ON/OFF".
TO UNLOCK SWITCH AND TURN TOOLPADDLE
"ON": Push the paddle lever FORWARDSWITCH
(toward the spindle) then squeeze the paddle
lever.
TO SWITCH TOOL "OFF": Release pressure
on the paddle lever. The switch is spring
loaded and will return to "OFF" position
automatically.
SIDE HANDLE
The side handle, used to guide and balance
the tool can be bolted to either side of the
spindle housing depending on personal
preference and comfort. Always use the side
handle for maximum control and ease of
operation.
ADJUSTING DEPTH OF CUT
Loosen wing nuts, raise or lower foot plateWINGFOOTWING
NUT
to desired depth, and securely tighten wingNUTPLATE
nuts by hand.
To prevent recoil and
!WARNING
damage to the tool, always
adjust the foot plate to a depth of so the
inner or outer flanges never contacts the
workpiece surface.
-8- |