1. CONNECTING YOUR TV-VIDEO COMBI
Important for the United KingdomConnecting the cables
This apparatus is fitted with an approved moulded 13 Amp
plug. To change a fuse in this type of plug proceed as follows:
aRemovefusecoverandfuse.
bFixnewfusewhichshouldbeaBS13625A,A.S.T.A.or
BSI approved type.
cRefitthefusecover.
If the fitted plug is not suitable for your socket outlets, it should
be cut off and an appropriate plug fitted in its place.
If the mains plug contains a fuse, this should have a value of
5A. If a plug without a fuse is used, the fuse at the distributionaInserttheaerialplugintothe2socket.
board should not be greater than 5A.
DNote: * The severed plug must be destroyed to avoid abInserttheplugofthemainscableintothewallsocket.
possible shock hazard should it be inserted into a 13A
socket elsewhere.
cAdjusttheradioaerialatthebackofthemachineto
How to connect a plug:obtain the best possible reception quality by positioning
The wires in the mains lead are coloured in accordance withthe ends of the aerial in opposite directions.
the following code:
BLUE - 'NEUTRAL' ('N')dIfthelittleredlightatthefrontofthesetisnotalight,
BROWN - 'LIVE' ('L')please switch on the set. The power switch8 is
located on the left side panel of the set.
dTheBLUEwiremustbeconnectedtotheterminalwhich
is marked with the letter 'N' or coloured BLACK.
Connecting a decoder or other equipment
eTheBROWNwiremustbeconnectedtotheterminal
which is marked with the letter 'L' or coloured RED.You can also connect additional equipment to theEXT.1
socket. For instance, a satellite receiver, decoder or
fDonotconnecteitherwirestotheearthterminalinthecamcorder.
plug which is marked with the letter 'E' or by the safety
earth symbol\or coloured green or green-and-yellow.
Before replacing the plug cover, make certain that the cord
grip is clamped over the sheath of the lead - not simply over
the two wires.
4 |
ACEC
PHILIPS
