SPECIFICATIONS
FREQUENCYRANGE: 20 cps to 20 kc in 3 ranges.
CALIBRATION: Directly in cycles for the lowest range, from 20 to 200 cps.
X10 and XlOO multiplier provided for higher ranges. Each
range covers approximately 270 degrees of. the 6" dial.
CALIBRATION
ACCURACY:
FREQUENCY
STABILITY: f270 including warm-up drift.
OUTPUT: f15 dbm (0 dbm - 1 mw) into impedance of 50, 150 and 600
ohms. Approximately 10 volts open circuit. Output is
center tapped and balanced to ground. Internal impedance
matches load impedance.
FREQUENCY
RESPONSE: Better than f0. 2 db, 30 cps to 15 kc, with output meter
kept at constant level (Ref: 1 kc).
DISTORTION: Less than 0. 170 at frequencies above 50 cps and less than
0. 2570 from 20 cps to 50 cps.
XUM LEVEL: At least 75 db below the output signal or more than 100 db
below zero level, whichever is the larger.
OUTPUT METER: Calibrated dbm in (0 dbm = 1 mw) and also in volts at 600
ohm level. Readability at least 0. 2 db at all points above
5070 scale reading.
OUTPUT
ATTENUATORS: 111 db in 0. 1 db steps. Accuracy approximately 0. 1 db.
POWER SUPPLY: 1151230 volts +1070, 501 1,000 cps, 140 watts.
DIMENS IONS : Cabinet Mount: 12-3/4" high, 20-3/4" wide, 14" deep.
Rack Mount: 10-1 12" high, 19" wide, 13-318" deep
behind panel.
WEIGHT: Cabinet Mount: Net 57 lbs. Shipping 78 lbs.
Rack Mount: Net 50 lbs. Shipping 72 lbs.
ACCESSORIES
AVAIUBLE: Model AC -16A Cable Assembly, two dual banana plugs.
Model AC-16B Cable Assembly, dual banana plug to BNC. |
ACEC
HEWLETT-PACKARD
