GENERAL SAFETY PRECAUTIONS
Machine2222s safety equipmentPress the throttle lock and make sure it returns to its original
position when you release it.
This section describes the machine2s safety equipment, its
purpose, and how checks and maintenance should be carried
out to ensure that it operates correctly. See the ?What is
what?? section to locate where this equipment is positioned
on your machine.
The life span of the machine can be reduced and the risk of
accidents can increase if machine maintenance is not carried
out correctly and if service and/or repairs are not carried out
professionally. If you need further information please contact
your nearest service workshop.
Check that the throttle control and throttle lock move freely
and that the return springs work properly.
IMPORTANT!
See instructions under the heading Start. Start the hedge
All servicing and repair work on the machine requires trimmer and apply full throttle. Release the throttle trigger and
special training. This is especially true of the machine2s check that the blades stop and remain stationary. If the blades
safety equipment. If your machine fails any of the checks move when the throttle trigger is in the idle position then the
described below you must contact your service agent. carburettor idle setting must be adjusted. See instructions
When you buy any of our products we guarantee the under the heading Maintenance.
availability of professional repairs and service. If the retailer
who sells your machine is not a servicing dealer, ask him for
the address of your nearest service agent.
WARNING! Never use a machine with faulty
safety equipment. The machine?s safety
!equipment must be checked and maintained
as described in this section. If your machine
fails any of these checks contact your
Stop switch
service agent to get it repaired.
Use the stop switch to switch off the engine.
Throttle lock
The throttle lock is designed to prevent accidental operation
of the throttle control. When you press the lock (A) (i.e. when
you grasp the handle) it releases the throttle control (B).
When you release the handle the throttle control and the
throttle lock both move back to their original positions. This
movement is controlled by two independent return springs.
This arrangement means that the throttle control is
automatically locked at the idle setting.
Start the engine and make sure the engine stops when you
move the stop switch to the stop setting.
Hand guard
Make sure the throttle control is locked at the idle setting The hand guard prevents hands from coming into contact with
when the throttle lock is released.the moving blades, for example, if the operator loses grip on
the front handle.
Check that the hand guard is Ţtted correctly.
Check that the hand guard is undamaged.
English - 7 |
ACEC
HUSQVARNA
