USINGTHE CVI (COMPONENT VIDEO INPUT) JACKS
omponent Video inputs provide for the
The CVI connection will be dominate over the AV1 in Video Input.
Chighest possible color and picture resolu-
When a Component Video Device is connected as described, it is best
tion in the playback of digital signal sourcenot to have a video signal connected to the AV1 in Video Input jack.
material, such as with DVD players. The
color difference signals (Pb, Pr) and the lumi-
BACK OF TV
nance (Y) signal are connected and received
separately, which allows for improved color
bandwidth information (not possible when
using composite video or S-Video connec-
tions).Monitor outAV1 inAV2 in
2
Connect the Component (Y, Pb, Pr)VIDEO
Video OUT jacks from the DVD play-Y
1L/Mono
er (or similar device) to the (Y, Pb, Pr)
AUDIOPb
in(put) jacks on the TV. When using1
S-VIDEO
the Component Video Inputs, it is best
RPr
not to connect a signal to the AV1 inCOMPONENT VIDEO INPUT
Video Jack.
Connect the red and white AUDIOCVI
CABLES to the Audio (left and right)COMPONENT
2VIDEO CABLES
output jacks on the rear of the accesso-(Green, Blue, Red)
ry device to the Audio (L and R) AV1
in Input Jacks on the TV.
AUDIO CABLES
Turn the TV and the DVD (or digital(RED/WHITE)
accessory device) ON.
3
Press the AV button or the CH +, �
buttons to scroll the available channels
4COMP VIDEOS-VIDEOVIDEOAUDIO
until CVI appears in the upper left cor-
YPbR
ner of the TV screen.
OUTOUTOUT
Insert a DVD disc into the DVD playerPrL
and press the PLAY button on the4
5
DVD Player.
HELPFUL HINTVOL
The description for the component video
connectors may differ depending on the
5
DVD player or accessory digital sourceACCESSORY DEVICE
3EQUIPPED WITH COMPONENT
equipment used (for example, Y, Pb, Pr; Y,
VIDEO OUTPUTS.
B-Y, R-Y; Y, Cr, Cb). Although abbrevia-
tions and terms may vary, the letters band r
stand for the blue and red color component
signal connectors, and Yindicates the lumi-
nance signal. Refer to your DVD or digital
accessory ownerOs manual for definitions
and connection details.
cc CHECK IT OUT
Repeatedly pressing the AV button on the
remote control will toggle the picture source
from the current channel, then AV1 (or CVI),
AV2, SVHS, Front, or current channel.
Note: The Component Video and Audio
cables needed for this connection are not
supplied with your TV. Please contact your
dealer or Philips at 800-531-0039 for infor-
mation about purchasing the needed cables.
11 |
ACEC
PHILIPS
