PROGRAMMINGTHE REMOTE CONTROLTO OPERATE ACCESSORY DEVICES
CODE ENTRY METHOD
he remote control supplied with your TVcan also be
Tprogrammed by entering a specific code for your
type of accessory device. Follow the instructions below
to program the remote using one of the codes listed on
pages 32-34. Codes from
VCR
Note: You must be in TV mode to enter the program-page 32-34
ming setup. The remote is in TV mode when no LED1
device lights blink.
Look up the codes for your brand of accessory
2054Satellite Receiver
device.
1
With the SELECT button held down, press
the OK button. Next, release the OK button
2
then release the SELECT button. The ACC2056
device light (LED) will blink once to confirm
correct procedure. If the ACC light blinks twice,
repeat step 2.
Cable Converter
2057
Press the NUMBER button that corresponds to
the type of accessory device you are using.
3
Digit 2 = Cable
Digit 3 = VCR2891Power
Digit 4 = DVD
Digit 5 = SAT
VCR DVDSATAMPACC
Again, the ACC device light will blink once to
29445
confirm the correct procedure.SLEEPSelect
AVACTIVECCCLOCK
Press the NUMBERED button to enter the 4
SOUNDCONTROLPICTURE
digit code number from pages 32-34. Again, the
4
ACC device light will blink once to confirm the2
correct procedure.
OK
Once the remote is in the correct ACC MODE
(follow steps 4-7 on previous page) press the
5
POWER button. If the accessory device powersSELECTSTATUS
ON your finished. If it does not power ON,MENUEXIT
2
repeat the procedure with another code listed. If
all codes fail, the remote will not control yourMUTE
specific accessory device.VOLCH
(Example: You have a VCR from Adventura and want to3
program the remote. ItOs code is 2001. Press and hold123
the SELECTbutton, then press and release the OKbut-
ton. Now release the SELECTbutton. Press the NUM-456
BER 3 for VCR, then enter the listed four digit code;
789
i.e.; 3, 2, 0, 0, 1.)
04
QuadraSurfTM
RECPROGRAMA/CH
SAPLISTTV/VCR
PIC SIZEMAIN
FREEZE
HELPFUL HINT
It is recommended that you use Philips brand external
accessory devices with your Philips television to
insure proper remote control functions. If you are
using Philips brand accessory devices, your remote
control should be ready to use with these devices.
31 |
ACEC
PHILIPS
