Connecting external equipment
Before connecting any external equipment, turn off all main power switches. If there is no switch
remove the mains plug from the wall socket.
*a decoder could
be Digital Satellite,
Free to Air or any
other compatible
IN
decoder.
decoder*OUT
TVVCR
!DO NOT connect
IN
equipment to both thevideo recorderOUT
SCART 4
Input 3 and SCART 3 IN/OUTSAT(EXT 4)
(EXT3) terminals at the
same time.
SCART 5
(EXT 5)
COMPOSITE VIDEO
INPUT (EXT 2)
SCART 3 (EXT 3)
TABS
INPUT 3 (EXT 3)
COMPOSITE VIDEO
INPUT (EXT 1)
COMPONENT
VIDEO INPUT
CABLEHOLDER(EXT 1)
FIXINGSTRAP
COMPONENT
VIDEO INPUT (EXT 2)
Before connecting the aerial, video and audioIn addition there is a fixed/variable external audio
cables, remove the back terminal covers byoutput which enables the connection to a suitable Hi-
squeezing the tab and pull the covers out.Fi unit, make sure the Speaker option in the Sound
menu is set to Off.
WE RECOMMEND THAT YOU USE SCART LEADS IN
A wide variety of external equipment can be
ADDITION TO AERIAL CABLES WHEREVER POSSIBLE
connected to the back of the television, therefore
the relevant owners manuals for alladditional
Aerial cables:
equipment mustbe referred to.
Connect the aerial to the socket on the rear of the
We recommend SCART 4 or 5for a decoder and
television. If you use a decoder* and/or a video
SCART 3for a VCR.
recorder it is essential that the aerial cable is connected
through the decoder and/or through the videoIf connecting S-VIDEO equipment, set the INPUT for
recorder to the television. EXT3. See page 18.
If the television automatically switches over to monitor
SCART leads:
external equipment, return to normal television by
Connect the video recorder IN/OUT socket to thepressing the desired programme position button.
television. Connect the decoder TV socket to the
To recall external equipment, press Bto select
television. Connect the video recorder SAT socket to
between EXT1, EXT2, EXT3, EXT4, EXT5, EXT6 or
the decoder VCR socket.
RGB/PC.
Before running Auto tuning put your decoder andThe cable holder can be used for aerial, VCR and
video recorder to Standby.audio cables. To open squeeze the tab and pull the
cable holder out. Do not use the cable holder as a
The phono sockets alongside the COMPONENT VIDEO
handle and make sure all cables are removed before
INPUT sockets will accept L and R audio signals.
moving the television.
6 |
ACEC
TOSHIBA
