Input selection and AV connections,
Analogueswitch-off
Defining the INPUT and OUTPUT sockets so that the television recognises connected equipment. See page 6
for a clear view of the back connection recommendations.
Use Rto change the EXT2 OUTPUToption to:Most media recorders and decoders send a signal2
through the SCART lead to switch the television to the
TV= The last television programme selection.correct Input socket. Alternatively press the external source
EXT1= The picture from equipment connected selection button Buntil the picture from connected
to SCART 1.equipment is shown.
DTV= The programme selection from digital
mode.
Input selection
EXT3= The picture from equipment connected to
the side input sockets.
Use the Input Selection if the television does not switch
over automatically.
Analogueswitch-off
Press Bto select EXT1, EXT2, EXT2S, EXT3and
1
EXT3S.
This is a digitaltelevision which is integrated to allow the
use of both digitaland analogueservices. However,
To return totelevision mode press again for
during the lifetime of this set it is very likely thatB
analoguemode then press again to select
analogueservices will be switched off to allow for moreB
DTVfor digitalmode.
new digitalservices.
This ?switch-off? will happen in a number of phases,
OUTPUT signal selection for SCART 2which will be advertised in your area well in advance.
It is recommended that at each phase the television is
re-tuned to ensure that existing and new digital
This enables selection of the source to output from
services can be viewed without disruption
SCART 2. For example, to record transmissions in stereo
(see Auto tuningpage).
from a stereo decoder - connect a stereo decoder to
SCART 1 and stereo media recorder to SCART 2, then
select EXT1as the EXT2 output. The signal received
through SCART 1 will output directly through SCART 2.
From the FEATUREmenu, press Qto select
1
EXT-2 OUTPUT.
FEATURE
SLEEP TIMEROFF
CHILD LOCK
TXT LANGUAGEENGLISH
LANGUAGEENGLISH
EXT-2 OUTPUTEXT1
BLUE BACKGRND
25 |
ACEC
TOSHIBA
