Using
your Dryer
1. Put the sorted load in the dryer
and close the door tightly.
2. Turn the Cycle Control Knob to
the cycle you want.
l Use LIGHT for small loads of Ilght-
weight fabrics. The LIGHT Cycle runs for
the least time Use LIGHT also to damp
dry loads for Ironing
l Use MED for normal size loads of light
or medium weight fabrics [sheets, piI-
lowcases, shirts. etc )
l Use HEAVY for normal size loads of
heavy fabrics [towels, jeans. corduroys) l Use PERMANENT PRESS for a longer
l Use EX HEAVY for large loads or for period of cool-down time Set the
heavv bulky Items (quilts, spreads, blan- pointer for the number of minutes of
kets, etc ) drying time you want [See Setting
Drying Imes on page 6.)
SUGGESTION: l If laundry IS left in the dryer after it has
You con set the Cycle Control Knob stopped tumbling, use the Tumble
anywhere past, between or below Press Control setting (page 6) to help
the EX HEAVY and LIGHT settings For remove the wrinkles
the first few loads 3. Set TEMPERATURE SELECTOR.
l Set the pointer In the mlddle of the l Turn the TEMPERATURE SELECTOR to
load setting the drying temperature needed for
l If the load IS drier than you want,
set it to the right [for less time) the the load See page 5 for suggested
next time settings
l If the load IS not as dry as you 4. Push the Start Button.
want, set it to the left [for more time) l Make sure the door IS closed and
the next time Cycle Control IS set If the door IS
For example: opened during the cycle. the dryer WI/I
stop To restart the dryer, close the
door and push the Start Button
5. To stop the dryer:
l Open the door
l Or, turn the Cycle Control Knob to one
of the OFF positions
l To change the setting while the
dryer is running, turn the Cycle Control
Knob, either way, so it points to the set-
ting you want
NOTE: The Cycle Control Knob
should point to OFF when the dryer is
not being used.
IMPORTANT To help reduce wren-
kllng, take the load from the dryer as
soon as tumbling stops This IS very
Important for permanent press, knits |
ACEC
WHIRLPOOL
