Load is tangled or twisted
ASSISTANCE OR SERVICE
 Did you overload the washer?
The wash load must be balanced and not overloaded. Loads Before calling for assistance or service, please check
should move freely during washing.?Troubleshooting.? It may save you the cost of a service call. If you
still need help, contact the dealer from whom you purchased the
 Did you wrap items around the agitator?washer, or a Whirlpool? designated service company.
Drop items loosely into the washer. Do not wrap items around
the agitator.When calling, please know the purchase date and the complete
model and serial number of your appliance. This information will
help us to better respond to your request.
Gray whites, dingy colors
 Did you properly sort the load??
Transfer of dye can occur when mixing whites and colors in a WHIRLPOOLWASHER
load. Sort dark clothes from whites and lights.Technical Specifications
 Was the wash temperature too low?
Use hot or warm washes if safe for the load. Make sure your Frequency of Operation 50 Hz
hot water system is adequate to provide a hot water wash.
 Did you use enough detergent, or do you have hard Amps 5 A
water?
Use more detergent for washing heavy soils in cold or hard Volts230 V
water.
 Are the hot and cold water hoses reversed? Height108 cm
Check that the hot and cold water hoses are connected to the
right taps. See the Installation Instructions.Width68 cm
Depth65 cm
Garment damage
 Check the following:Maximum Water Inlet Pressure690 kPa
Were sharp items removed from pockets before washing?
Empty pockets, zip zippers, snap or hook fasteners before Minimum Water Inlet Pressure34,5 kPa
washing.
Were strings and sashes tied to avoid tangling?
Were items damaged before washing? Mend rips and broken
threads in seams before washing.
 Did you overload the washer?
The wash load must be balanced and not overloaded. Loads
should move freely during washing.
 Did you properly add chlorine bleach?
Do not pour chlorine bleach directly onto load. Wipe up
bleach spills. Undiluted bleach will damage fabrics.
 Did you follow the manufacturer?s care label instructions?
13 |
ACEC
WHIRLPOOL
