Oven door glass
The oven door has two glass plates, set next to each other. The inner
plate can be removed for cleaning.
1Caution: the following steps must be performed only with the oven
door removed! If the glass is removed while the door is attached, the
lighter weight may cause it to spring up and cause injury.
1Important! Rough handling of the glass, especially at the edges of the
front plate, may cause it to break.
Removing the glass from the door
1.Detach the door and, with the han-
dle downwards, lower it onto a soft,
even surface.
2.Grasp the top glass plate under-
neath, and push it towards the door
handle against the pressure spring,
until it comes free.
3.Hold the plate gently underneath,
and slide it out.
Cleaning the glass
Attaching the glass to the door
1.Insert the plate obliquely into the
retaining frame at the handle.
2.Lower the plate. Place the glass
against the pressurespring at the
handle, and in front of the retaining
frame at the bottom of the door,
then push it into the frame.
The glass plate must be firmly at-
tached!
Re-attach the door to the oven.
42 |
ACEC
AEG
