9 Patch Switching (Application: Bank Hold ON)
In the factory default condition,
the patch pedal switches all
Bank Hold ON
patches, regardless of the bankKeeping the EDIT key depressed for at least 1 second activates Bank
divisions. This kind of patchHold. To cancel Bank Hold, press the EDIT key again for 1 second.
switching is called the Bank Hold
off condition.
The Bank Hold function limits
switching to the four patches
within a bank. When the function
Bank switching
is activated, the patch pedals
Banks A, b, C, d, E, F
switch only between the patchescan be switched.
in the current bank. To activate the
function, keep the EDIT key
PATCHPATCH
depressed for at least 1 second inDOWNUP
the Play mode. The BANK HOLD
indicator on the display lights up.
Patch switching
To turn the function off again,
4 patches within bank can be switched.
perform the same step (press the
EDIT key for at least 1 second).
The BANK HOLD indicator on
ZOOMFS01
the display goes out.
Bank switching (Bank UP pedal)
Using optional foot switch FS01,
Bank switching can be performedbanks A, b, C, d, E, F can be switched by foot.
using the VALUE + / - keys or the
optional foot switch FS01
connected to the CONTROL IN jack on the rear panel.
Bank/patch switching
when Bank Hold is on
ZOOM
FS01
BANK F
BANK EPATCH 1
PATCH 2
BANK dPATCH 1
PATCH 3
BANK CPATCH 1PATCH 2
PATCH 4
PATCH 3
BANK bPATCH 1PATCH 2
PATCH 4
PATCH 2PATCH 3
BANK APATCH 1
PATCH 4
PATCH 3
PATCH 1PATCH 2
PATCH 4
PATCH 2PATCH 3
PATCH 4BANK HOLD ON
PATCH 3
PATCH 4
BANK UP
BANK DOWN
BANK HOLD OFF
10 Patch Switching (Application: Direct Load OFF)
In the default condition, the 505 is
DIRECT LOAD OFF
set up in such a way that pressing a
Keeping STORE key depressed for 1 second
patch pedal immediately switchesturns Direct Load off.
the patch and alters the outputThe same procedure serves to turn it on.
sound. This is called Direct Load
ON. This switching principle is
most convenient when the desired
patches are adjacent or close to
each other. However, when
wanting to switch to a patch that isBank switching
further away, it may be desirableBanks A, b, C, d, E, F
not to activate the sound of thecan be switched.
other patches in between.
PATCHPATCH
When this is desired, turn theDOWNUP
Direct Load function off as
follows. When Direct Load has
Patch switching
been turned off, switching banks
Patches can be switched.
and patches has no effect until the
user confirms the selection.
For example, when going from
patch 1 to patch 4 with Direct Load active, patches 2
and 3 will briefly be heard when the patch UP pedalConfirming a patch
is pressed three times. When Direct Load is ofWhen display indication flashes, pressing f,
pressing the patch UP pedal will change the numberboth patch pedals together confirms the
patch and switches the output sound.
on the display (the number flashes), but until the
user confirms the choice, the sound remains that of
patch 1.
To turn Direct Load on or off, keep the STORE key
depressed for at least 1 second.
To confirm a choice after selecting a patch with
Direct Load off, press both patch pedals
simultaneously.
Example: switching from patch 1 to patch 4
Patch switching completed
Confirm |
ACEC
OTHERS
