Setup
Manual Convergence Adjustment Mode
(117 Point Manual Adjustment)MENUVideo
Audio
Channel Manager
NOTE: 1. Please turn ONyour television for at leastLocks
Timers
20 minutes before using this feature.
Setup
2. AUTO ADJUSTMENT MODEis Move SEL Select
recommended. If convergence is still not
acceptable, use the MANUAL
ADJUSTMENT MODE.
3. If AUTO ADJUSTMENT MODEis selected
or the MAGIC FOCUSbutton is pressed,
Setup
all manual adjust mode settings will be
Magic Focus Tune Up
erased.Menu Preference
Set The Inputs
Set Closed Captions
Using the Remote Control, select SETUP, MAGICSet Monitor Out
FOCUS TUNE UP, MANUAL ADJUSTMENT MODE,Upgrades
Quick Start Up
117 POINT MANUAL, START to access convergence Move SEL Set
117 point pattern. The adjustment point is indicated by
the Adjustment Point Cursor.
To Move Adjustment Point
Setup
To move the Adjustment Point Cursor using theMagic Focus Tune Up
OR
CURSOR buttons, the Adjustment Point Cursor mustAlign the Red, Green and Blue colors
to correct for Magnetic Influences.
be WHITE. Another way to move the Adjustment Point
Cursor is to press the following buttons: [2] up, [4] left, Adjustment Mode : 117 Point Manual
Q At Turn Off, after 90 days.
[5] down, [6] right. If you use the number buttons while If you want to adjust now Start
Move SEL Return
the adjustment point is WHITE, it will change to RED.
On-Screen Display
To Change the Color of Adjustment Point
Press the SELECT button repeatedly (WHITE-RED-
BLUE-WHITE...). GREEN color is fixed and cannot be
adjusted.
To Adjust the Convergence
Adjustment
Move the Adjustment Point Cursor to the point to bePoint
Cursor
adjusted. Use the CURSOR buttons to match the RED
and BLUE colors to GREEN (reference color). Properly
aligned, all three colors should appear white.
If convergence is acceptable after MANUAL
CONVERGENCE adjustment, press EXIT button toEXITSetup
Magic Focus Tune Up
access menu mode.
Manual Adjust
Please make a selection from
the options below.
1. Use the CURSOR buttons to highlight your chosen
Cancel Done Back Reset
option.
Move SEL Return
2. Press the SELECT button to select.
3. Select CANCEL to cancel adjusted data and return
to main picture.
4. Select DONE to save your adjustments and return to main picture.
5. Select BACK to return to the manual convergence adjustment mode.
6. Select RESET to recall the factory pre-set convergence data.
51 |
ACEC
HITACHI
