SETTING UP
Connecting and turning on your new TV
Before connecting any external equipment, turn off all main power switches.
The TV back connections�
the back of your TV
WE RECOMMEND THAT YOU USE SCART
LEADS IN ADDITION TO AERIAL CABLES
WHEREVER POSSIBLE
SCART 3
Aerial cables:
SCART 2
Connect the aerial to the socket on the rear of the
television. If you use a decoder* and/or a video
recorder it is essential that the aerial cable is
connected through the decoder and/or through theSCART 1
video recorder to the television.
Scart leads:
Connect the video recorder IN/OUT socket to the
TV. Connect the decoder TV socket to the TV.
decoder*
Connect the video recorder SAT socket to the
decoder VCR socket.IN
TVVCR
OUT
Before running Auto tuningput your decoder and
video recorder to Standby.
*a decoder could be:
video recorder
Digital Satellite, Analogue
We recommend
Scart 1
Satellite, or any other
for a decoder, IN
Scart 2
compatible decoder.for
a VCR and Scart 3 for
OUT
additional equipment. IN/OUTSAT
�and switching your new TV on�
On the front of the TV�
YNIf the red power-on light is unlit, press the POWER button on the front of the
TV to switch the set on and then press a number button on the remote
control to see the screen.
�and with the remote control:
Press the Standby Buttoni:
RED = Power OnThis allows you to put the set
into standby mode when leaving
GREEN = On Timer is setthe TV unattended for short
periods of time. To return to TV
mode press the ibutton, or any
of the numbered buttons on
the remote control. The picture
may take a few seconds to appear.
7 |
ACEC
TOSHIBA
