Stainless steel surfaces3. Wipe the ceramic hob clean with Cleaning of gas burners
Perform daily cleaning with a slightly a damp cloth or kitchen towel. Clean the control panel and knobs plus
damp cloth. For more severe soiling, Tough stains can be removed by the pan grid, as well as burner caps and
use a liquid cream. Always clean the rubbing the stain hard with rings, with ordinary cleansing agents.
steel in the direction of the steel finish. kitchen towel.
To ensure that the steel retains its 4. Wipe off remaining cleaning Never use scouring powder, Brillo
shine, it is recommended that you use agent with a damp cloth.pads, metal pads or other scouring
a polishing agent for stainless steel on 5. Wipe with a dry cloth, if agents on enamelled or painted
a regular basis. Always polish in the required.surfaces!
direction of the steel finish (cross-
wise).Make sure that the ceramic glass is dry Avoid boil-over
Never use steel wool, metal sponges or when you heat it up again. Ceramic If water accidentally gets into the edge
other abrasive cleaning agents.glass can develop rainbow-like stripes of the burner head (boil-over) the
if heated while damp.water must be removed with a lint-free
The ceramic glass cloth before the burner is turned on
Immediately scrape off stains caused Spillages must be removed again.
by food which has boiled over, spilled immediately, while the burner is still Likewise, caps and grids must be
sugar, dishes containing sugar (jam, warm, using a ceramic glass scraper. thoroughly wiped off before the gas
juice, etc.), melted plastic and Especially damaging are melted ring is used again so that the boil-over
aluminium foil while the ceramic glass plastic, aluminium, or any foodstuff does not permanently scar the enamel
is still hot. If the ceramic glass is containing sugar, including natural or paint.
sugar, as these can create permanent
allowed to cool it may become
damaged. ?pockmarks? and craters on the
ceramic surface. After cleaning, polish
After use the ceramic glass should be thoroughly with the cleaning agent
wiped with a damp cloth with washing supplied with the unit.
up liquid. For severe soiling you can
follow these steps:Defects in the ceramic surface which
can be related to the above are not
1. Remove stains etc., with the covered by the warranty.
ceramic glass scraper.
Warning:
2. Make sure that the hob has cooled
down. Use a ceramic Aluminium foil and plastic utensils
cleaning agent such as vitroclen. should not to be placed on hot
Shake the bottle and apply a couple surfaces.
of squirts to the ceramic hob.The surface should not be used for
storage.
1011 |
ACEC
AEG
