OPERATING YOUR WASHER
USINGYOURWASHER(CONT.)
3.(OPTIONAL STEP) Pour measuredliquid 6.Turn the Load Size selector to the correct setting
bleach into the liquidfor your wash load and
bleach dispenser.the type of fabric being
Bleach will be dilutedwashed.
automatically during theChoose a load size
Y
wash part of the cycle.that allows the load to
YNever use more than move freely for best
250 mL (1 cup) for a fullfabric care.
load. Use less with a
YChange the setting
smaller load size.after the washer has
Ystarted filling by turningFollow the manufac-
turerOs directions for
the selector to a
safe use.
different setting.
YTo avoid spilling, use a cup with a pouring spout.
7.Set the Water Temperature selector to the correct
Do not let bleach splash, drip, or run down into
setting for the type of
the washer basket.
fabric and soils being
Ywashed.Make sure you use only liquid bleach in this
dispenser.
YYour washer uses
4.(OPTIONAL STEP) Pour measured liquid fabricautomatic temperature
softenerinto the control to maintain a
liquid fabric softener uniform water tempera-
dispenser.ture by regulating
YDo not spill or drip incoming hot and cold
any fabric softener on water. This helps
the clothes.eliminate undissolved
Make sure you use
Ydetergent and ensures consistent cleaning results.
only liquid fabric The cold wash is maintained at approximately 24!C
softener in this (75!F). The warm wash is maintained at
dispenser.approximately 38!C (100!F).
NOTE: Make sure that both hot and cold water
Dilute liquid fabric softener by filling the dispensertaps are turned on, or the automatic temperature
with warm water until control feature will not work properly.
liquid reaches the
YUse the warmest water safe for fabric.
crossbar in the opening.
YFollow garment label instructions.
YSoftener is added
HOT: 49!C (120!F) or above
automatically during
� Whites and pastelsthe rinse portion of
� Heavy and greasy soils
the cycle.
WARM: 32! to 44!C (90! to 110!F)
� Bright colours
� Moderate to light soils
COLD: 21! to 32!C (70! to 90!F)
5.Close the washer lid.� Colours that bleed or fade
8.(OPTIONAL STEP) Your washer has an Extra
Rinse selector. For an additional rinse and spin
at the end of a wash cycle, set the Extra Rinse
selector to ON.
6 |
ACEC
WHIRLPOOL
