English
ProWash emulation setting
ProWash may operate using a different channel configuration to the standard set up. This function may be useful in situa-
tions where you may be using other ProSpot projectors which are not in the LX series or when using various controllers with
inflexible channel assignment features. To utilise this altered configuration as shown in the table which follows, you should:
AOO1menu +o�DMXtabella DMXenter+o�STRDenter
Selezione del modo di funzionamentostandard 14 canali
(vedi tabella)
alla ricezione dati DMX
+o�EMULenter
emulazione ProWash non
versione LX (vedi tabella)
Following this procedure, ProWash LX will utilise 16 DMX channels and its DMX address should be altered accordingly:
Altering the DMX setting:
When initially powered up, each projector will show A001 indicating DMX address 1; a projector thus addressed (when in
-EMUL- mode) will respond to channels 1 to 16 from the DMX 512 controller; a second unit should be addressed as 17, a
third as 33 and so on until the final ProWash LX, has been addressed.
1) Press the + or � buttons until the desired DMX address is displayed. The display will flash to indicate the selected address is not
stored in memory
AOO1+o�A013DMX 13 addressenterA013
selection of new DMX 512 address that,The unit reacts to new
if not confirmed, it flashes for 6 secondsDMX 512 address
before going back to default (to the
address previously recorded)
2) Press the enter button to confirm your selection; the display will stop flashing and the projector will now respond to the
new DMX 512 setting.
The following table outlines the respective DMX channel functions when in ProWash.emulation mode.
channelfunctiontype of controleffectdecimal
1Base (pan) coarseproportionalcoarse control of the base movement0-255
2Yoke (tilt) coarseproportionalcoarse control of the Yoke movement0-255
3Base (pan) fineproportionalfine control of the base movement0-255
4Yoke (tilt) fineproportionalfine control of the Yoke movement0-255
5Speed pan/tilt movementstepMax speed (tracking mode)0
proportionalMax speed from max. to min. vector mode)1-249
Max. speed, black-out while PAN,TILT moving or color changes
step250-255
(tracking mode)
lamp on/off, reset, fans speed
6stepfan max. speed0
control
Fan min. speed (silent operation) from 0 to 127 decreasing fan
proportional1-127
speed
stepLamp ON, reset, open position128-139
stepNo function140-229
stepLamp Off, 3 sec. delay230-239
stepNo function240-255
7coloursproportionalOpen/white0-17
proportionalcolour 118-35
proportionalcoluor 236-53
proportionalcolour 354-72
proportionalcolour 473-90
proportionalcolour 591-108
proportionalcolour 6109-127
proportionalForwards rainbow effect from fast to slow128-190
stepNo rotation191-192
proportionalBackwards rainbow effect from slow to fast193-255
8cyanproportionalproportional cyan control from white to cyan0-255
9magentaproportionalproportional magenta control from white to magenta0-255
10yellowproportionalproportional yellow control from white to yellow0-255
CMY and dimmer speed
11proportionalfrom max to min. control speed0-255
control |
ACEC
OTHERS
