Fitting the hob to the
worktop
Before fitting the hob into the
cut out, an adhesive seal)
must be fitted to the
underside outside edge of
the hob. It is essential that
no gaps are left in this seal
in order to prevent spillage
near the hob seeping into
the cabinet below.FO 2108
1) Remove the pan
supports, the burners
caps and crowns and
turn the hob upside
down, taking care the
ignition candles are not
damaged in thisA
operation.
2) Place the sealing gasket
all around the glass top
edge as shown in the
diagram.
3) Fit the hob in the cut out
and push it down until the
glass top and the
working top make
contact, as shown in the
diagram.
FO 2107
A) Sealing gasket
72 |