Magnetic door seal
After opening and closing the door of your freezer whilst it is in oper-
ation, you will not immediately be able to open the door again
because a vacuum will have developed inside, keeping the door closed
until the pressures inside and outside the door have equalised. After a
few minutes you can easily reopen the door.
Switching off the appliance
1. To switch off the appliance, turn the temperature regulator to
+
position "0".
If the appliance is not going to be used for an extended period:
2. Remove all deep-frozen packages as well as ice-trays.
3. Switch off the appliance by turning the temperature regulator to posi-
tion "0".
4. Remove the mains plug or switch off or disconnect the electricity sup-
ply.
5. Clean thoroughly (see section: OCleaning and Care�).
6. Leave the door open to avoid the build up of odours.
Energy Saving Tips
Y Do not install the appliance near cookers, radiators or other sources
of warmth. High ambient temperatures cause longer, more frequent
operation of the compressor.
Y Ensure sufficient air circulation and exhaust at the appliance base
and at the back wall of the appliance. Never cover air vent openings.
Y Do not place warm foods into the appliance. Allow warm foods to
cool first.
Y Only leave door open as long as necessary.
Y Do not set temperature any colder than necessary.
Y Put frozen food in the fridge to defrost. The cold in the frozen food
will then be used to cool the fridge.
Y Always keep the heat emitting condenser, the metal grille on the rear
wall of your appliance clean.
19 |
ACEC
AEG
