MalfunctionPossible CauseRemedy
Temperature is notPlease look in the OInitial
properly adjusted.Start Up� section.
Open the door only as long
as necessary. Press the fastDoor was open for an
extended period.
The freezer temperature isfreeze switch.
not sufficient, red lightA large quantity of warm
food placed in the appli-Press the fast freeze
lights up, temperature
alarm signal sounds.ance within the last 24switch.
hours.
The appliance is near aPlease look in the
OInstallation Location�
heat source.section.
Carefully warm the leaking
sections of the door seal
Heavy build up of frost,Door seal is not air tightwith a hair dryer (not hot-
possibly also on the door(possibly after changingter than approx. 50 !C). At
seal.over the hinges).the same time shape the
warmed door seal by hand
such that it sits correctly.
Appliance is not level.Readjust the feet.
The appliance is touchingMove the appliance
the wall or other objects.slightly.
A components, e.g. a pipe,
Unsual noises.
on the rear of theIf necessary, carefully bend
appliance is touchingthe component out of the
another part of the appli-way.
ance or the wall.
The compressor does not
start immediately afterThis is normal, no error has The compressor starts after
changing the temperature occurred.a period of time.
setting.
Important: regularly check on the red temperature pilot light and
thermometer that the storage temperature is being maintained.
20 |
ACEC
AEG
