?
RapidCool ControlTemperature
Used for fast cooling. The air conditioner automatically sets the  Press the up arrow button to raise the temperature. Each time
fan speed to High and temperature to 64°F (18oC).you press or hold the up arrow button, the temperature will go
th?up 2oF (1oC) until it reaches 90°F (32°C).
NOTE: 6 Sense System control button does not operate when
?
RapidCool control is selected.
?
1. Press RapidCoolcontrol. The air conditioner automatically
sets the fan speed to High and temperature to 64°F (18oC).
 Press the down arrow button to lower the temperature. Each
time you press or hold the down arrow button, the
temperature will go down 2oF (1oC) until it reaches 64°F
?
2. To turn RapidCool control off, press the RapidCool control (18°C).
button, Mode, Fan, Power or the up arrow button.
Fan Speed
Press FAN to choose High, Med, Low or Auto.
NOTE: Auto fan speed cannot be selected in Fan mode.Timer
To set Timer for a 30-minute to 24-hour delay before air
conditioner is turned off (air conditioner must be On):
1. Press TIMER. Timer indicator light on the air conditioner
control panel will flash.
Sleep Control
NOTES:
 If the current room temperature is 80oF (26oC) or higher, the
set temperature will not change when Sleep control is 2. Press up or down arrow button to change the delay time from
activated.30 minutes to 24 hours.
3. After 5 seconds, Timer indicator light on the air conditioner
 If the current room temperature is below 80oF (26oC), the set
control panel will remain on.
temperature will automatically increase 2oF (1oC) during the
first 2 hours after Sleep control is activated.
To set Timer to turn on air conditioner, keeping previous
The set temperature will not increase during the last 6 hours settings:
of Sleep control.1. Turn off the air conditioner.
1. Press MODE to select Cool or Dry.2. Press TIMER. Timer indicator light on the air conditioner
2. Press FAN to select High, Med or Low.control panel will flash.
3. Press the up or down arrow button to set the temperature. 3. Press up or down arrow button to change the delay time from
30 minutes to 24 hours.
4. Press SLEEP. After 10 seconds, the lights on the control
panel display will dim. The mode indicator lights will remain 4. After 5 seconds, Timer indicator light on the air conditioner
on.control panel will remain on.
NOTE: The mode, temperature and fan speed may be
To set Timer to turn on air conditioner, changing the
adjusted during Sleep control. After 10 seconds, the lights on
previous settings:
the control panel display will dim again.
1. Turn on air conditioner.
th?
2. Adjust the mode to 6 Sense System control, Cool, Dry, Fan
?
or RapidCoolcontrol.
3. For Cool mode:
 Adjust fan speed to High, Med, Low or Auto.
5. To turn off Sleep control, press SLEEP again. or wait 8 hours
for the air conditioner to turn off automatically. Adjust temperature between 64oF and 90oF (18oC and
32oC).
NOTE: The air conditioner will return to previous settings after
Sleep control is turned off.
12 |
ACEC
WHIRLPOOL
