aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
MAINTENANCE
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
Regular maintenance and cleaning will
ensure good performance and reliability,
while extending the working life of the hood.
Special attention should be paid to the
grease filters and to the charcoal filter when
the hood is used in the recirculation mode.
Metal grease filter
Fig. 8
" Cleaning
The metal grease filter should be cleaned
every two months with normal usage and
can be washed in a dishwasher or by hand
using a mild detergent or liquid soap.
" Replacement
" To remove the metal grease filter cassettes
press inwardly on the release catch while
lowering the front edge (fig. 8) and remove
the cassettes from the slot at the back (fig.
9).
" Once the cassettes have been cleaned refit
in reverse order.
Thin synthetic filters
On certain models the metal grease filter cas-
settes are replaced with a lower grille panel
containing a paper filter with saturation
indicators. The paper filter visible through the
perforated grille cannot be washed and shouldFig. 9
be replaced when the violet colour of the dots
has spread over the whole surface and, in
anycase, at least every two months.
Attention: There could be a possible fire
hazard if the filters are not replaced
according to these instructions. For
ease of maintenance, the grille can be
removed by pressing inwardly on the two
slide catches. Allow the grille to be hinged
down at the back and unhook from the side
guides as illustrated in fig. 10.
Fig. 10
20GB |
ACEC
ALNO
