AUDIO OPERATIONS
Preset TuningManual Memory Presetting
This facility is used to store FM, AM broadcasting from
Channel 1 to 30 respectively.162
Automatic Memory Presetting
142
POWER ON53 4,6
1. Select the tuner mode.
POWER ON2. Select the AM or FM by pressing the band selector
3button.
3. Press the mode button to change to tuning mode.
1. Select the tuner mode.(The PRESET CH. indicator disappears from the
display).
2. Select the AM or FM by pressing the band selector4. Select the frequency you want to preset by pressing
button.tuning/preset up or down button.
3. Press the memory button for a while (for more than5. Press the memory button briefly, MEMO display will
1.5 seconds).blink at an interval of 1 second.
1 The start frequency will show in the display.
I87.5 MHz in FM, 530 kHz in AM.6. While the MEMO indicator is lit, press the numeric
2 The frequency and display will automatically scan.key(s) to input the channel number in which the data
I100 kHz steps for FM, 10 kHz steps for AM.(AM or FM band and frequency) for the broadcast is
3 The frequency shown in the display will rapidlyto be stored (or press the preset button then press
change. As each station is located a presetthe memory button again).
number will appear in the display indicating which
preset memory button has been assigned to the
station located. The scanning process will continue Recalling Frequencies
to operate in this fashion until 30 stations havePress the numeric key(s) corresponding to the channel
been found and entered into the preset memorynumber to tune directly to a broadcast.
or when there are no more stations to be found
on the waveband chosen. The memory indicator Using the Memory Scan function
will extinguish and let you hear the last station toWhen the memory scan button is pressed, the preset
be memorized.channels in which frequencies in the band (AM or FM)
I To listen to the memorized station select the bandselected have been stored are scanned at 5-second
required and press the numeric keys 1, 2, 3 etc.intervals. When you hear a broadcast you want to listen
to, release the Memory Scan function by pressing the
4. The last memorized channel of each band will bememory scan button again.
displayed when Auto Memory is completed. Check
the programmed frequencies with preset up, down
button. "Back-up" memory function
This function conserves the already preset station mem-
ories, and "Most-recent" memory function, even in the
event of a cut-off of power supply, as when the plug is
pulled out of the wall outlet, for 3 days.
� 16 � |
ACEC
TEAC
