Mounting the battery
1Raise the viewfinder.Removing the battery
While pressing the battery eject button, slide
the battery upward to remove.
OSet the POWER switch to OFF, and check
that the CAMERA/VCR lamp has gone off
before removing the battery.
OSupport the battery with your hand to
ensure that it will not drop.
Battery eject button
2Push the battery straight in, and slide it
downward until it clicks into position.
1
23
3Return the viewfinder to its original
position.
Supplying power from the AC adapter
1Raise the viewfinder.
2Push the battery-type connector on the1
DC cable straight in, and slide it
downward until it clicks into position.
3Connect the DC cable to the AC adapter.
4Connect the AC cable to the power outlet.
5Return the viewfinder to its original2
position.
CAUTION:
4
OThis unit will operate on 110/120/220/240V
AC. An AC plug adapter may be required3
for voltages other than 120V AC.
If a conversion plug is required, consultConnect the AC adapter correctly as
with your dealer as to which one is to be
purchased.shown in the figure.
OThe rating plate is on the underside of theOThe battery cannot be charged while
AC Adapter.supplying power from the AC adapter to the
ODisconnect the AC mains plug from the ACcamera recorder.
22 |
ACEC
PANASONIC
