handheld.qxp 2005.03.01. 17:58 Page 4
English
Unpacking and assemblyNB:
Check that all the parts are in the box.?Never vacuum in wet places.
?Never vacuum near fl ammable gases, liquids etc.
?Never vacuum up sharp objects such as shards of glass etc.
Charging?Never vacuum up liquids, as these can severely damage the machine.
?Never vacuum up ash, lit cigarette ends etc.
1. Place Ergorapido in the charging station. An indicator light will come on?Never vacuum up fi ne dust from plaster, concrete, fl our or ash, for
once Ergorapido makes contact with the charging station. It takes 8-10
hours to fully charge the batteries before the fi rst use. When Ergorapidoexample.
?Do not leave the vacuum cleaner in direct sunlight.
is totally discharged, approximately 12-16 hours charging is required to?Avoid exposing the vacuum cleaner or battery to strong heat.
regain full capacity. In order to ensure that it is always ready for use,
Ergorapido should be left on charge when not being used.?The battery must not be dismantled, short-circuited, placed against a
metal surface or exposed to strong heat.
Vacuuming
Disposal
2. Start Ergorapido by pressing the start button. The vacuum cleaner will
stop as soon as you release the button.If an Ergorapido is to be disposed of, the batteries should be removed. Used
batteries should never be disposed of with household waste. These should
3. The crevice nozzle can be pulled out in order to reach awkward places.always be taken to a recycling station.
4. If anything gets stuck in the crevice nozzle, it can be completely removed
from the hand unit. Depress the release button and pull out the crevice
Taking out batteries
nozzle. Clean it and remove anything that has got stuck in the air duct.
9. NB Ergorapido must not be connected to the charging station while you
Emptying/cleaningare removing the batteries.
A. Quick emptying of the dust container?Undo the four screws.
?Carefully lift the hood.
5. Open the quick emptying cover and empty the contents into a suitable?Unclip the connecting cables and lift out the batteries.
vessel or bag. Press back the quick emptying cover until it clicks into
place.Servicing or repairs
In cases of breakdown or faults, your Ergorapido must be taken to an
B. Quick cleaning using the vacuum cleaning coverauthorised Electrolux service centre.
6Lift up the vacuum cleaning cover. Vacuum clean the dust container andIf the supply cord is damaged, it must be replaced by Electrolux or its service
fi lter by placing the hose handle of another vacuum cleaner against theagent or a similarily qualifi ed person in order to avoid a hazard.
vacuum cleaning hole.
C. Careful cleaning of the dust container and fi ltersThe symbol on the product or on its packaging indicates that this product
may not be treated as household waste. Instead it shall be handed over to the
7. Release the whole dust container by pressing in the release button onapplicable collection point for the recycling of electrical and electronic
either side of the container.
8. Take out the dust container and separate both fi lters. The dust container,equipment.* By ensuring this product is disposed of correctly, you will help
prevent potential negative consequences for the environment and human
prefi lter and fi ne fi lter can be shaken clean or cleaned and rinsed usinghealth, which could otherwise be caused by inappropriate waste handling of
warm water. Make sure that the parts are dry before they are
reassembled.this product. For more detailed information about recycling of this product,
please contact your local city offi ce, your household waste disposal service
Reassemble in reverse order.or the shop where you purchased the product.
Never wash dust containers or fi lters in a dishwasher.
* The regulation will come into force from 1. July, 2005.
4 |
ACEC
AEG
