Setting menus
SW MODE screen
Item/Item/
Description of settingsDescription of settings
(display mode)(display mode)
MID GAINFor setting the gain value which is to beUSER1For setting the operation of the function
(Camera)allocated to the M position of the GAIN(Camera)allocated to the USER1 button.
switch.COLOR BAR:
0 dB, 3 dB, 6 dB, 9 dB, 12 dBThe color bar display is set to ON or OFF.
SPOTLIGHT:
HIGH GAINFor setting the gain value which is to be
The auto iris control for the spotlight is
(Camera)allocated to the H position of the GAIN
set to ON or OFF.
switch.BACKLIGHT:
0 dB, 3 dB, 6 dB, 9 dB, 12 dBThe auto iris control for backlight
compensation is set to ON or OFF.
ATWFor setting the ATW (Auto Tracking White)
BLACKFADE:
(Camera)function which is to be allocated to the
When the button is held down, the whole
WHITE BAL switch.
image is faded out into black. The sound
OFF:
is also faded out at the same time.
The ATW function is not activated.
WHITEFADE:
However, if it has been set in the AUTO
When the button is held down, the whole
button or USER button, it will follow theimage is faded out into white. The sound
operation of the button concerned.is also faded out at the same time.
Ach:MODECHECK:
The ATW function is activated when theWhen the button is pressed, the camera
WHITE BAL switch has been set to the Astatus currently set is displayed in the
position.viewfinder and on the LCD monitor
Bch:where it can be checked.
The ATW function is activated when theATW:
WHITE BAL switch has been set to the BThe operation of the ATW function is set
position.to ON or OFF.
PRE:ATWLOCK:
The ATW function is activated when theWhen the button is pressed, the white
balance value is fixed; when it is pressed
WHITE BAL switch has been set to the
again, the operation of the ATW function
PRST position.
is performed.
HANDLE ZOOMFor setting the zoom speeds which are toGAIN:18 dB:
(Camera)be allocated to the positions of theWhen this button is pressed, the gain is
HANDLE ZOOM switch.set to 18 dB.
L/OFF/H:O The picture may be temporarily
LOW/OFF/HIGH are set to the 1/2/3disturbed when the gain has been
positions. (At OFF, no zoom operationsswitched to 18 dB or from 18 dB to
another value.
are performed.)
INDEX:
L/M/H:
When the button is pressed during
LOW/MID/HIGH are set to the 1/2/3
shooting or recording, an index signal is
positions.
recorded on the tape. If it is pressed while
IRIS DIALFor setting the rotational direction of theshooting or recording is temporarily
(Camera)IRIS dial and iris control (in the MANUALstopped, the index signal recording
IRIS mode).standby mode is established. When
DOWN OPEN:shooting or recording is commenced from
The iris opens when the IRIS dial isthis mode, the index signal will be recorded
turned downward.on the tape. Recording index signals
enables index searches to be performed
UP OPEN:
during playback. (See page 63)
The iris opens when the IRIS dial is
SLOWSHUT:
turned upward.
When the button is pressed, the slow
shutter mode is established. Each time
it is pressed, the mode is turned ON or
OFF alternatively.
USER2For setting the operation of the function to
(Camera)be allocated to the USER2 button.
The settings are the same as for the ones
for the USER1 items.
BACKLIGHT
USER3For setting the operation of the function to
(Camera)be allocated to the USER3 button.
The settings are the same as for the ones
for the USER1 items.
INDEX
The underlining indicates the factory setting.
43 |
ACEC
PANASONIC
