Date and Time Settings
7When the MENU/REC LOCK switch is set to OFF,
the clock automatically starts running from time
and date set.
TIME
03- 3-01 54H
3:25:00
Flashing
For the seconds, ?00? is set. Even when the switch
is set to MENU, the time will keep advancing if it
has not been changed.
To clear the date and time display, set POSITION under (DISPLAY) on Menu Screen 2 to OFF.
Even if the power should fail for a period of up to one week, the date, time and time mode display (internal
timer setting alarm recall) data are stored in the memory (but only if power has been supplied continuously to
the unit for 3 or more days). When the unit has just been purchased or when it has not been used for a long
time, the data is not stored in the memory and the display shown below appears.
[TIME ADJUST] P1
01- 1-2000 SATAll the internal timer settings are set to OFF,
0:00:00and the alarm recall display is cleared.
For the date setting, the unit automatically adjusts for leap years.
Due to temperature fluctuations and other factors, the clock time may run fast or slow with a monthly error of
up to ?60 seconds. This is not indicative of malfunctioning. Reset the time at regular intervals.
When the time is reset to ?0:00:00? as described, check the menu settings. If any of the settings are incorrect,
please set them again.
Time/Date Display Position
The position of the date and time displays on the TV monitor changes as shown below when (DISPLAY) on Menu
Screen 2 is changed.
Top left cornerTop right cornerBottom left cornerBottom right cornerCentreNo display
1Set the MENU/REC LOCK switch to MENU to TIME/DATE display position adjustment function
display to menu screens. Press the page button to When the unit is in STOP or EJECT mode, the position
display Menu Screen 2 on the TV monitor.of the displayed time/date can be adjusted by pressing
the TRACKING (-) or TRACKING (+) button.
POSITION : L-UPPER
Pressing the TRACKING (-) button moves the
position vertically. (Pressing the button 3 times will
2Press the set (+, -) buttons to position the display return the display to its original position.)
as desired.
Pressing the TRACKING (+) button moves the
POSITION : L-BOTTOMposition horizontally. (Pressing the button 3 times
will return the display to its original position.)
3Upon completion of the settings, set the MENU/ Pressing the (-) and (+) buttons simultaneously will
REC LOCK switch to OFF. The regular screen is return the display to its original position (factory
restored, and the date and time appear at the setting).
selected position.
14 |
ACEC
PANASONIC
